Re: Setting Optra R+ ethernet INA address
Louis Ohland wrote:
I'd like to set up my Optra so I can print over the net. How do I set
the ethernet INA's IP address?
Use the menu on the printer. I dumped my Optra L, but from memory it is
its own category called Network Setup. Select TCP/IP and set an IP
(192.168.1.xxx), subnet mask (255.255.255.0), and gateway (192.168.1.1).
All should be well from that point. Specify the IP when installing
the Lexmark drivers.
.
Relevant Pages
- Re: For the same cost as the cheapest Macbook Pro I can get
... Memory 3GB System Memory ... Operating System Windows 7 Home Premium 64-bit ... Graphics Intel® Graphics Media Accelerator ... Networking 10/100Base-T Ethernet LAN ...
(comp.sys.mac.advocacy) - Re: Problems with AMD64 and 8 GB RAM?
... > controller. ... the machine freezes during heavy DB reporting over ... the memory size changed during normal operations, ...
(freebsd-stable) - Re: arbitrary packets on an ethernet network
... user-defined protocol. ... This is a very minimalistic tcp/ip stack for old 8-bit-computers (e.g. Apple ... has a very small memory footprint. ... But this environment isn't really good at doing ethernet in general... ...
(comp.os.linux.embedded) - Re: Xilinx GbE performance
... The single memory is shared by MicroBlaze/PPC ... for NPI) and the custom Ethernet IP (MAC + some packet composers, ... and if the goal cant be reached there will be none... ... even TRECKs marketing booklet promised only 355 Mbps for MTU1500 ...
(comp.arch.fpga) - Re: Thoughts of a GXT150M ADF
... Hmm, perhaps U2, U3 and U9 are the RAMDACs for Red, Green and Blue, and have their own ports to DMA and I/O memory space.... ... Louis Ohland wrote: ... One thought is each address is the storage location for video memory. ... Do we have four DMA buffers? ...
(comp.sys.ibm.ps2.hardware) |
|
