Re: Setting Optra R+ ethernet INA address
- From: "William R. Walsh" <newsgroups1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 29 Mar 2007 22:48:13 GMT
Okay, so the printer has a valid IP address. But it doesn't match the
addressing scheme that is used on your network.
If you haven't already, change a computer over to an address in the
10.54.32.xxx range. Set the netmask and gateway to match those on the
printer. Clear out any other settings for DNS, etc. because they don't
matter and you don't care. (That's right. You don't care.)
You should then be able to change the settings on your printer to match your
current addressing scheme. Now just change the computer back to the settings
it was using, reboot the printer (if need be) and try again. It should work.
William
.
- References:
- Setting Optra R+ ethernet INA address
- From: Louis Ohland
- Re: Setting Optra R+ ethernet INA address
- From: RickE
- Re: Setting Optra R+ ethernet INA address
- From: Louis Ohland
- Setting Optra R+ ethernet INA address
- Prev by Date: Re: Auction: Vintage IBM Personal System/2 Model 65 SX PS/2 8565
- Next by Date: 3C527 Aplenty!
- Previous by thread: Re: Setting Optra R+ ethernet INA address
- Next by thread: Re: Setting Optra R+ ethernet INA address
- Index(es):
Relevant Pages
|
