Re: W9xNT MCA Adapters - SPOCK-206

Hi!

Okay, I got some time to work with the SCSI adapters again...here are the
QSPOCK results:

Early Uncached SCSI/A (64F4377/76 and 84F8233 ROMs):


Port: 3540 Present
Port: 3548 --
Port: 3550 --
Port: 3558 --
Port: 3560 --
Port: 3568 --
Port: 3570 --
Port: 3578 --

( 1 ) IBM SCSI adapters found

Port 3540 : Status Information
-------------------------------
(05h) Basic Control: 0 0 0 0 0 0 1 1
0 Interrupt Enable: Yes
1 DMA Enable: Yes
6-2 Reserved: --
7 Hardware Reset: No

(07h) Basic Status: 0 0 0 0 0 1 0 0
0 Busy: No
1 Interrupt Request: No
2 Cmd Interface Empty: Yes : Read by the adapter
3 Cmd Interface Full: No : Emptied by the adapter
7-4 Reserved: --

(06h) Interrupt Status: 0 0 0 1 0 0 0 0
3-0 Device-ID: 0
7-4 Interrupt-ID: ( 0 ) SCB Command completed with success

SCB * Get Adapter Info: ( F ) SCB Command completed with success
Adapter ID: 8EFE
POS Register [2]: 1 1 1 1 0 0 0 1
POS Register [3]: 1 1 1 1 1 1 0 0
POS Register [4]: 1 0 1 0 0 0 0 0
Interrupt Level: Eh ( 14 )
Adapter Revision Level: 12h
Channel Connector: 32-bit
Num Devices Supported: 7
Num LUNs per Device: 8
Num Logical Devices: 16
DMA Pacing Factor: 100
EOI to Interrupt Off: 1 msecs
Max Adapter Busy Time: 10 secs
Device Cache Status: 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Device Retry Status: 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1

------------------------------------------------------
Runstream (R) Query SPOCK / DOS Beta Rel. 01.02
Copyright (C) UnalZ, 2006 All rights reserved.
------------------------------------------------------

Late Uncached SCSI/A (92F2245/44, 54G1800 ROMs, all soldered)


Port: 3540 Present
Port: 3548 --
Port: 3550 --
Port: 3558 --
Port: 3560 --
Port: 3568 --
Port: 3570 --
Port: 3578 --

( 1 ) IBM SCSI adapters found

Port 3540 : Status Information
-------------------------------
(05h) Basic Control: 0 0 0 0 0 0 1 1
0 Interrupt Enable: Yes
1 DMA Enable: Yes
6-2 Reserved: --
7 Hardware Reset: No

(07h) Basic Status: 0 0 0 0 0 1 0 0
0 Busy: No
1 Interrupt Request: No
2 Cmd Interface Empty: Yes : Read by the adapter
3 Cmd Interface Full: No : Emptied by the adapter
7-4 Reserved: --

(06h) Interrupt Status: 0 0 0 1 0 0 0 0
3-0 Device-ID: 0
7-4 Interrupt-ID: ( 0 ) SCB Command completed with success

SCB * Get Adapter Info: ( F ) SCB Command completed with success
Adapter ID: 8EFE
POS Register [2]: 1 1 1 1 0 0 0 1
POS Register [3]: 1 1 1 1 1 1 0 0
POS Register [4]: 1 0 1 0 0 0 0 0
Interrupt Level: Eh ( 14 )
Adapter Revision Level: 26h
Channel Connector: 32-bit
Num Devices Supported: 7
Num LUNs per Device: 8
Num Logical Devices: 16
DMA Pacing Factor: 100
EOI to Interrupt Off: 1 msecs
Max Adapter Busy Time: 10 secs
Device Cache Status: 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
Device Retry Status: 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1

------------------------------------------------------
Runstream (R) Query SPOCK / DOS Beta Rel. 01.02
Copyright (C) UnalZ, 2006 All rights reserved.
------------------------------------------------------

9585 "X" Planar:


Port: 3540 Present
Port: 3548 --
Port: 3550 --
Port: 3558 --
Port: 3560 --
Port: 3568 --
Port: 3570 --
Port: 3578 --

( 1 ) IBM SCSI adapters found

Port 3540 : Status Information
-------------------------------
(05h) Basic Control: 0 0 0 0 0 0 1 1
0 Interrupt Enable: Yes
1 DMA Enable: Yes
6-2 Reserved: --
7 Hardware Reset: No

(07h) Basic Status: 0 0 0 0 0 1 0 0
0 Busy: No
1 Interrupt Request: No
2 Cmd Interface Empty: Yes : Read by the adapter
3 Cmd Interface Full: No : Emptied by the adapter
7-4 Reserved: --

(06h) Interrupt Status: 0 0 0 1 0 0 0 0
3-0 Device-ID: 0
7-4 Interrupt-ID: ( 0 ) SCB Command completed with success

SCB * Get Adapter Info: ( F ) SCB Command completed with success
Adapter ID: 8EFF
POS Register [2]: 0 0 0 0 0 0 0 1
POS Register [3]: 1 1 1 1 1 1 0 0
POS Register [4]: 0 0 1 0 0 0 0 0
Interrupt Level: Eh ( 14 )
Adapter Revision Level: 25h
Channel Connector: 32-bit
Num Devices Supported: 7
Num LUNs per Device: 8
Num Logical Devices: 16
DMA Pacing Factor: 100
EOI to Interrupt Off: 1 msecs
Max Adapter Busy Time: 30 secs
Device Cache Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Device Retry Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

------------------------------------------------------
Runstream (R) Query SPOCK / DOS Beta Rel. 01.02
Copyright (C) UnalZ, 2006 All rights reserved.
------------------------------------------------------


Old (single osc) Cached SCSI (64F4376/77, 64F5984 ROMs):


Port: 3540 Present
Port: 3548 --
Port: 3550 --
Port: 3558 --
Port: 3560 --
Port: 3568 --
Port: 3570 --
Port: 3578 --

( 1 ) IBM SCSI adapters found

Port 3540 : Status Information
-------------------------------
(05h) Basic Control: 0 0 0 0 0 0 1 1
0 Interrupt Enable: Yes
1 DMA Enable: Yes
6-2 Reserved: --
7 Hardware Reset: No

(07h) Basic Status: 0 0 0 0 0 1 0 0
0 Busy: No
1 Interrupt Request: No
2 Cmd Interface Empty: Yes : Read by the adapter
3 Cmd Interface Full: No : Emptied by the adapter
7-4 Reserved: --

(06h) Interrupt Status: 0 0 0 1 0 0 0 0
3-0 Device-ID: 0
7-4 Interrupt-ID: ( 0 ) SCB Command completed with success

SCB * Get Adapter Info: ( F ) SCB Command completed with success
Adapter ID: 8EFF
POS Register [2]: 1 1 1 1 0 0 0 1
POS Register [3]: 1 1 1 1 1 1 0 0
POS Register [4]: 1 0 1 0 0 0 0 0
Interrupt Level: Eh ( 14 )
Adapter Revision Level: 9h
Channel Connector: 32-bit
Num Devices Supported: 7
Num LUNs per Device: 8
Num Logical Devices: 16
DMA Pacing Factor: 100
EOI to Interrupt Off: 1 msecs
Max Adapter Busy Time: 30 secs
Device Cache Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Device Retry Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

------------------------------------------------------
Runstream (R) Query SPOCK / DOS Beta Rel. 01.02
Copyright (C) UnalZ, 2006 All rights reserved.
------------------------------------------------------


Newest (triple OSC) Cached SCSI (94F2244/45, 10G4890 ROMs):


Port: 3540 Present
Port: 3548 --
Port: 3550 --
Port: 3558 --
Port: 3560 --
Port: 3568 --
Port: 3570 --
Port: 3578 --

( 1 ) IBM SCSI adapters found

Port 3540 : Status Information
-------------------------------
(05h) Basic Control: 0 0 0 0 0 0 1 1
0 Interrupt Enable: Yes
1 DMA Enable: Yes
6-2 Reserved: --
7 Hardware Reset: No

(07h) Basic Status: 0 0 0 0 0 1 0 0
0 Busy: No
1 Interrupt Request: No
2 Cmd Interface Empty: Yes : Read by the adapter
3 Cmd Interface Full: No : Emptied by the adapter
7-4 Reserved: --

(06h) Interrupt Status: 0 0 0 1 0 0 0 0
3-0 Device-ID: 0
7-4 Interrupt-ID: ( 0 ) SCB Command completed with success

SCB * Get Adapter Info: ( F ) SCB Command completed with success
Adapter ID: 8EFF
POS Register [2]: 1 1 1 1 0 0 0 1
POS Register [3]: 1 1 1 1 1 1 0 0
POS Register [4]: 1 0 1 0 0 0 0 0
Interrupt Level: Eh ( 14 )
Adapter Revision Level: 25h
Channel Connector: 32-bit
Num Devices Supported: 7
Num LUNs per Device: 8
Num Logical Devices: 16
DMA Pacing Factor: 100
EOI to Interrupt Off: 1 msecs
Max Adapter Busy Time: 30 secs
Device Cache Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Device Retry Status: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

------------------------------------------------------
Runstream (R) Query SPOCK / DOS Beta Rel. 01.02
Copyright (C) UnalZ, 2006 All rights reserved.
------------------------------------------------------

....and that's everything. If you need the FRU/PN of the adapters, let me
know.

William

--
Brought to you by an IBM PS/2 9585-0XF, "Defiant"
AMD 486-133/64MB/2GB S/N 23HN457


.

Relevant Pages

  • Re: POSID & information on RS/6K 4-1, 4-2, 4-4, 4-6, 4-7, & 4-C adap
    ... Port: 3540 Present ... Interrupt Enable: Yes ... Cmd Interface Full: No: Emptied by the adapter ... Num Devices Supported: 30 ...
    (comp.sys.ibm.ps2.hardware)
  • Re: SPOCK-206 Model 90 / Corvette / Narrow RESULTS
    ... Whacked the SPOCK206.INF, DRVIDX.bin and the other one, reinstalled 206, set the I/O and DMA to the correct values. ... Dropped an M back in, reconfigured and W98SE came up with everything in protected mode [except the parallel port, the autoconfig must have set it to LPT1]. ... Interrupt Enable: Yes ... Cmd Interface Full: No: Emptied by the adapter ...
    (comp.sys.ibm.ps2.hardware)
  • QSPOCK for DFW, EDFW, Corvette, and Short SCSI/A
    ... UZ, if you run QSPOCK with more than one adapter, it is confusing to sort em all out. ... Could you add the FRU and slot to the port line at top? ... Interrupt Enable: Yes ... Num Devices Supported: 30 ...
    (comp.sys.ibm.ps2.hardware)
  • Re: QSPOCK 02.00 Released
    ... Get POS and Adapter Info returned: ... Port: 3540 Present ... Interrupt Enable: Yes ... Num Devices Supported: 30 ...
    (comp.sys.ibm.ps2.hardware)
  • Re: Updating KLN 94 - Parallels Mac OS X
    ... Honeywell claimed that you had to use certain USB-Comm port adapters, and I tried the one they recommended with no improvement. ... I'm using the latest version of the GPS Database Loader. ... Updating the Honeywell KLN 94 GPS from a MacBook Pro is now working ... Keyspan USA-19HS USB-serial adapter. ...
    (rec.aviation.owning)