8560 Ethernet diddlyframus

Hi guys.....

Beginning an 8560 restoration just to see what all I can pack into this
great old machine. To start with, it only has an external 5 1/4 floppy
drive card and a memory card with 16mb plus 1mb on the planar for a
total of 15mb....and you know why.

Here is problem #1.....I cannot get my ethernet connection to work.
Here is the setup:

1. SMC 8013EP/A adapter installed using the BNC connection.

2. MSDOS 6.22.

3. NetBEUI protocol using Microsoft Network Client.

4. Textbook installation done with software.

When I attempt to connect to a network drive, both lights on the
8013EP/A flash several times indicating (I think) both sending and
receiving........but I keep getting the error message "The computer
name specified in the network path cannot be located."

I am using the same setup on my AT breadboard machine....the only
difference is the cards are ISA......and it works perfectly.

Anybody have any experience with this setup?

CT the Puzzled

.

Relevant Pages

  • Re: 8560 Ethernet diddlyframus
    ... > drive card and a memory card with 16mb plus 1mb on the planar for a ... SMC 8013EP/A adapter installed using the BNC connection. ... NetBEUI protocol using Microsoft Network Client. ... > I am using the same setup on my AT breadboard machine....the only ...
    (comp.sys.ibm.ps2.hardware)
  • [opensuse] multiple network configuration
    ... I've setup the wired network and the wifi card to use fixed ... IPs because that's what I am using on my network. ... This setup works fine for me (provided I remember to use the slider that locks ...
    (SuSE)
  • Re: [opensuse] multiple network configuration
    ... I've setup the wired network and the wifi card to use fixed ... IPs because that's what I am using on my network. ... This setup works fine for me (provided I remember to use the slider that locks ...
    (SuSE)
  • Re: Nat Problems
    ... I have install the 3rd card but i can't figure out how to setup my network. ... here is a diagram what i am thinking to do BUT DONT KNOW HOW TO DO IT ...
    (microsoft.public.isa)
  • Re: WAP54Gs with WPA not handing out IPs from SBS2003 server
    ... Do you have enough IP addresses in the DHCP pool on the DHCP server? ... There's not even 50 machines total on the network. ... I'll assume you're running Windoze XP Home using Wireless Zero Config ... With the PCMCIA card, it's the WZC software. ...
    (alt.internet.wireless)