EMC SAN storage

Hi all,

I am using EMC CX3-40 + Red Hat Enterprise 4 + Veritas Cluster Service 5 +
VxVM + Naviphere 6
A Raid Group with LUN is configured by engineer before. Moreover, rhere are
free SAN disks in EMC,
how can I use these free SAN disk and create a mount point in VCS.
E.g. am I need to create another RAID group (how?), create a new LUN (how?)
how to add to cluster with VxVM and VCS?

Thanks for your kindly help!

.

Relevant Pages

  • Re: EMC SAN storage
    ... A Raid Group with LUN is configured by engineer before. ... free SAN disks in EMC, ... how to add to cluster with VxVM and VCS? ...
    (comp.sys.ibm.pc.hardware.storage)
  • SUMMARY: adding EMC-CX600 LUN: format gives "drive type unknown"
    ... VxVM as the single and same disk. ... connected a large combination of SUN servers with different HBA types, ... Subject: adding EMC-CX600 LUN: format gives "drive type unknown" ... Now we need to add an extra LUN coming from an EMC-Clariion CX600 array. ...
    (SunManagers)
  • Expanding LUNs with Navisphere
    ... I need to expand a couple of LUNs and am seeking advice regarding how ... that had multiple LUNs on each RAID group with the LUNs assigned to ... Only one server uses the two RAID ... single LUN in each RAID group (i.e., Expand LUN 12 to use all disk ...
    (comp.arch.storage)
  • Re: Has anyone used Clariion LUN Migrate function on-line?
    ... of the freed LUNs were in the same RAID Group. ... The existing LUN has an HPUX volume group, logical volume, ... I've done plenty of lower-case-m migrations from array to ...
    (comp.arch.storage)
  • Has anyone used Clariion LUN Migrate function on-line?
    ... I need to build a 400 GB LUN for a snap clone BCV cycle. ... My Clariion is nearly full so I did some space reclamation ... separate RAID Groups. ... of the freed LUNs were in the same RAID Group. ...
    (comp.arch.storage)