Re: RAID newbie...can I have several partitions on a RAID 1 array?

On 11 Sep 2006 12:14:56 GMT, Arno Wagner <me@xxxxxxxxxxx> wrote:


I don't disagree with Arno at all: as he kinda said, for true
*hardware* redundancy, you need *at least* a spare controller.

"at least" is the key phrase. Adding a second controller and array
means that the host computer is now a single point of failure instead
of the DAS as well. That may be OK but the real goal is redundancy
that is appropriate to the situaion/applicaion. IMHO In a lot of
cases with modern HW the old online second controller concept is a
waste that well exceeds the point of diminishing returns. IMHO it is
more common for either simpler DAS or larger cluster other
multi-computer system to make more sense. YMMV. Of course I'm
talking live HW, not spares. You may disagree but the key is there is
no definitive best protection via redundancy on a small scale- it all
depends.

But even total hardware redundancy does not supply any protection
against bad software (e.g., Windows) or against funble-fingers.

My conclusion: RAID is nice, but backup is essential.

Indeed. You are entirely correct of course. With current backup
you can do away with the spare controller. I am getting so used to

Often, especially with desktops like the OP has.

But without raid the whole system or volume goes down during a repair
and restore when there is hardware failure/decommission or certain
kinds of storage upgrades. Sometimes that isn't acceptable so the
argument for raid in those cases goes beyond the protection mechanism.

Also there are some RAID implementations that can assist is resisting
data loss/corruption due to failing/marginal media. Backup and manual
intervention does not address that particularly well.

Of course the OP is talking about entry level PC desktop RAID 1. But
there are also theoretical performance benefits in better
implementations as well as some other levels which are used to boost
storage speeds. In those cases, of course. the presence of a current
backup is quite irrelevant to the argument for raid.

people here running without backup, that I start to overlook
the obvious. Thanks for reminding me!

As Bob says, RAID only protects from hardware problems, so it only
fills part of the things a backup does. Essentially RAID is a
''hassle reducer'': It decreases the probability that you need
to restore your backup.

I agree with this point. But I'd add the caveat that entry level
desktop RAID like the OP's is not 100% foolproof automatic protection
against any & every kind of failure or failing media. So your careful
wording which includes "hassle reducer" and "decreases" is quite
appropriate IMO. Perhaps I'd add the word "potential" to "hassle
reducer." But that's me
.

Relevant Pages

  • Re: RAID newbie...can I have several partitions on a RAID 1 array?
    ... With current backup ... argument for raid in those cases goes beyond the protection mechanism. ... against any & every kind of failure or failing media. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: RAIDING different size drives
    ... failure regardless of what what happens when part of it fails. ... Having no experience with windows software raid, I did not know if there were any complications involved. ... But I am now happy to hear that recovery from failure in this situation is straightforward, and therefore this sort of raid setup does offer useful protection. ... That's why testing your restore procedure is so vital - many people believe they have good backup procedures, but have problems when they have to do a restore. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: RAID for backup. RAID 5 or RAID 1?
    ... You are correct in that RAID is somewhat a protection against hardware ... external backup solution which relies on harddisks? ... I understand the point about disaster recovery (being apart of my previous ... > RAID is about continued operation in a hardware failure scenario. ...
    (microsoft.public.windows.server.sbs)
  • Re: OT external hard drives for photo work
    ... build disks that are larger than the physical units. ... your computer and RAID and all connected hard disks. ... daily backup regime). ... data loss: hard drive failure. ...
    (rec.photo.digital.slr-systems)
  • Re: RAID level for personal archival?
    ... RAID has two functions: It enhances the reliability of your data (the ... failure, but brain failure. ... RAID array is consumer-grade (although enterprise-grade RAID arrays ...
    (comp.arch.storage)