W2K doesn't recognize partitions on dynamic volume

I have a 150MB drive running on a 2ndry controller with two partitions
created with the Disk Management screen in Management. I had to
rebuild the boot drive and now it seems the entire dynamic drive as
"foreign."

What do I do?

.

Relevant Pages

  • W2K doesnt recognize partitions on dynamic volume
    ... I have a 150MB drive running on a 2ndry controller with two partitions ... created with the Disk Management screen in Management. ... rebuild the boot drive and now Disk Management sees the entire dynamic ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: atacontrol Raid, cannot re-add member to array
    ... I have tried the detach/attach on a non-raid controller to simulate ... failure and have *never* managed to get rebuild to work. ... I've never had any hotswap-capable drives to test the hot-swap ...
    (freebsd-stable)
  • Re: error updating irrelevant partition during FC5 install
    ... an on-board ATA controller and a second ATA controller card plugged in. ... With the partitions I was cutting, hda4 should not have been updated ... You are only allowed 4 actual partitions. ... since freebsd has its own scheme for slicing BIOS partitions. ...
    (Fedora)
  • Re: 3Ware-8006-2: extrem langsamer Rebuild
    ... wenn die Platten keine dolle Zugriffszeit haben. ... der Controller wirlich so langsam beim Rebuild? ... Normalerweise ist der Trick erst Rebuild und dann Server nutzen. ...
    (de.comp.hardware.misc)
  • Re: A7V hangs at ESCD
    ... that controller card to work by switching PCI slots. ... Norton formatted the 250 GB drive into two partitions. ... second has 127 gigs of total space. ... You might even try to repartition it into other sizes (or maybe You ...
    (alt.comp.periphs.mainboard.asus)