Re: Hot swapping SCSI drive in IBM 336 server
Is it possible to hot swap one of the raid drives to a larger capacity,
let it rebuild then swap another until I have increased my total
overall disk capacity? If not, how would I increase storage capacity on
this server? Anyone any ideas. Thanks in advance.
You did not say how your storage is configured (any spare bays, SCSI ports,
RAID version).
But in general that is not possible that way. Backup, upgrade, restore. Or
add external storage.
.
Relevant Pages
- Re: why swap at all?
... > Swap serves another purpose: ... allocate excessive swap space. ... A run-away process on a server with too much swap can cause it to grind to ... If, on the other hand, there is excessive storage, it can continue running ...
(Linux-Kernel) - Re: increasing the storage capacity
... > The total disk capacity is 640 GB. ... We were thinking of removing the SSA 214 ... Since your E3000 isn't going to support most of the newer storage one ...
(comp.sys.sun.hardware) - Re: RAM Speicherauslastung
... If a ProLiant server has 4 GB of memory installed, ... regions is automatically remapped to above the 4 GB boundary on HP ProLiant ... on the ProLiant BL20p G4 server blade using the Intel ... Any of the following ProLiant servers or StorageWorks Servers and Storage ...
(microsoft.public.de.german.backoffice.smallbiz) - [SLE] OT: Speaking of VMware.....
... EMC TO ACQUIRE VMware, ... ADVANCING CONVERGENCE OF SERVER AND ... STORAGE VIRTUALIZATION ...
(SuSE) - Re: Homebuilt server (NAS/SAN) vs the prefab ones? Peformance differences? SAN vs NAS vs Homebuilt S
... a NAS device would do storage only, without the ability to run applications. ... I'm using a Dell PE830 that runs Windows Storage Server. ... specifically because it would run backup applications. ... similar to backup to an external SCSI tape drive. ...
(microsoft.public.windows.server.sbs) |
|
