Windows 2003 R2 breaks SAN HBA drivers
- From: "Siddhartha Jain" <reach.siddhartha@xxxxxxxxx>
- Date: 30 Jan 2006 08:12:46 -0800
Equipment tested
=============
1. IBM DS4300
2. QLogic QLA 2340 HBA
3. IBM x366 Quad Proc (EM64T)
Software tested
===========
1. Windows 2003 R2 x64 Enterprise Edition
2. Windows 2003 R2 Enterprise Edition (32-bit)
3. QLogic drivers for Windows 2003 x64 (Storport version 9.1.0.16)
4. Microsoft drivers for Windows 2003 x64 (SCSI port )
5. Qlogic drivers for Windows 2003 (Storport ver 9.1.0.16)
6. Qlogic drivers for Windows 2003 (SCSIport ver 9.1.0.13)
Nothing works on R2!!! I can get the volume to appear in "Disk
Management" but the volume cannot be formatted throwing an error that
says "Format incomplete. Operation could be completed". Oddly, the
volume shows as "Healthy".
I can say R2 breaks the drivers because all drivers work fine on pre-R2
releases. Any tweaks/workarounds for R2 are welcome.
- Siddhartha
.
- Prev by Date: Re: 137 gig limit
- Next by Date: Re: Disk Editor for USB drive?
- Previous by thread: old 68pin cables for 'new' U320 cards and HDDs ? ok ?
- Next by thread: Re: Disk to disk through network
- Index(es):
