Re: Ghost 2003 cant see FAT32 partitions?

Wayne <nospam@xxxxxxxxxxx> wrote:
> In article <3pduk4F9tu3nU1@xxxxxxxxxxxxxx>, rod_speed@xxxxxxxxx
> says...
>>
>> Yes, wipe the drive with something like clearhdd which
>> writes zeros thru all the sectors in the first few hundred
>> tracks. That gets rid of everything completely.
>
> Thanks Rod, that sounds like a very good plan. There has to be some
> reason Ghost doesnt allow FAT32 destinations on this disk, and this
> should eliminate some things. I downloaded clearhdd, and will try to
> get up the gumption this weekend. The BIOS access to the RAID and
> SATA may be the whole problem, but Dos seems not to have any trouble
> with this disk.
>
> I'm wondering if clearhdd possibly could address my other issue with
> this disk too. When I redid all the disk partitions, it was because I
> changed from the Promise Raid controller to the VIA Raid controller.
> Which was good, and it also seemed to allow changing from the fixed
> 64KB stripe size, and I specified 32KB. But after restoring the
> partitions with Ghost, it came out 64KB again. I dont know why, it
> appeared that Ghost must have done that somehow. I dont know why
> Ghost would care, and am wishfully thinking perhaps the value was
> just stored there someplace, and this might rewrite that too.

Yeah, the stripe size has to be stored somewhere. Corse its possible
that where its stored gets restored by Ghost too, particularly if you
restore an entire physical drive rather than just a partition.


.

Relevant Pages

  • Re: Blue screen wen I try to restore XP image with Ghost 9.0 on Dell 9
    ... When I try to restore an Image (that I made with Ghost) of the ... Restoring it to a new *type* of hard disk drive or with a different hard ... You need to perform a Repair installation (Google for repair installation of ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Ghost 2003 cant see FAT32 partitions?
    ... I downloaded clearhdd, and will try to ... with this disk. ... changed from the Promise Raid controller to the VIA Raid controller. ... with Ghost, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Ghost 2003 cant see FAT32 partitions?
    ... > destinations on this disk, and this should eliminate some things. ... > I downloaded clearhdd, and will try to get up the gumption this weekend. ... > But after restoring the partitions with Ghost, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Norton Ghost 9 users... clone/cpy from rescue env
    ... But setting aside the network capability of Ghost 9, ... advantage does that version have over Ghost 2003 in terms of restoring a ... Should the original source disk need ... > etc and scan all the drives on the computer or your network to find G9 or ...
    (microsoft.public.windowsxp.general)
  • Re: Copy Drive feature of Symantecs GHOST 10
    ... hard drive to another hard drive is not restoring an image. ... I have two drives in my computer and they are the same ... I have been using Ghost for years to copy C drive to D ... something goes wrong with the source disk, ...
    (microsoft.public.windowsxp.basics)