BartPE and Smart Arrary 6i driver


In my work place I have an HP Proliant 380 G4 server
with a 300GB hard drive using HP Smart Array 6i controller.

Trying to boot up the system in Bart-PE but the later cannot
see the hard drive because it does not have the 6i driver.

Since this server does not have a floopy disk, there is no
way to boot up Bart-PE, pressing F6, and have the user to insert
a floppy with the 6i driver.

How can I let Bart-PE to recognize the Smart Array 6i controller
driver?

TIA

.

Relevant Pages

  • RE: 5.1 & Compaq Smart Array
    ... There should be a way to disable ACPI during boot up. ... I boot the server it says "Boot FreeBSD with ACPI enabled" ... 5.1 & Compaq Smart Array ... Mine is a Compaq Smart-2SL Array Controller ...
    (freebsd-questions)
  • Re: ADS Sysprep [SysprepMassStorage] problem with Compaq.
    ... image and adding the driver in that way before you redeploy it. ... Smart Array 5300 Controller ... I use an old IBM Netfinity server as my Master Device and was able to follow ...
    (microsoft.public.windows.server.setup)
  • Re: Moving the Hardrive
    ... How to Move a Windows Installation to Different Hardwarehttp://support.microsoft.com/?id=249694 ... | this was an old server except for a new HD) ... | Now with winxp you could change the hd controller to "Standard Primary ... | On the new Box I get a hung boot I believe I get hung on the ...
    (microsoft.public.windows.server.general)
  • Re: ADS Sysprep [SysprepMassStorage] problem with Compaq.
    ... I have a solution that works for Server 2003, but since you are running W2K, ... your array controller drivers for your Master ... Smart Array 5300 Controller ...
    (microsoft.public.windows.server.setup)
  • Re: Disaster recovery restore options
    ... you can take a drive image from on server and transfer it to ... The critical pieces are the HAL, boot controller, and video. ... In the production server, you take the production drives offline, and you ...
    (microsoft.public.windows.server.sbs)