Re: findpart "Fdisk F6 sector"
- From: "Rod Speed" <rod_speed@xxxxxxxxx>
- Date: Thu, 1 Sep 2005 08:01:43 +1000
MartyEgan <martyegan@xxxxxxxxx> wrote:
> Hello again! This time I'm at work and someone's PC crashed. They
> were using it normally, it began to perform slowly. They rebooted and
> it never came up successfully again. After POST, they got an error in
> text mode. I'll find out the error tomorrow. Drive is a Maxtor 160G
> SATA.
>
> I've mounted the drive as a secondary drive in a working XP SP2
> system, and run findpart (see below). I also installed a S.M.A.R.T
> utility called "HDD Health" from http://www.panterasoft.com. Ever
> since I installed the drive as a secondary on this working system, it
> is very slow in explorer. The HDD Health utility popped up two
> errors a few minutes after I ran it. One said "Attribute Raw Read
> Error Rate changes from 70 to 69". The other says "Attribute TA
> Counter Increased changes from 252 to 253."
>
> Taking a clue from my previous post on a different drive, I ran the
> command below, with the output shown also. It has run a long time
> without generating any files in the c:\temp folder. I'll let it run
> overnight.
>
> C:\temp\findpart>findpart findntfs 2 5 0 1 backupboot 268333695 copy
>
> FindNTFS, version FP 4.67 - for Windows 95/98/ME/NT/2000/XP.
> Copyright Svend Olaf Mikkelsen, 2005.
>
> OS: Windows 5.1.2600 Service Pack 2
>
> Disk: 2 Cylinders: 19452 Heads: 255 Sectors: 63 MB: 152586
>
> CHS 5/0/1 LBA: 80325
>
> Options: Backupboot: 268333695
>
> Searching ... ..
>
>
>
>
>
>
>
>
> OS: Windows 5.1.2600 Service Pack 2
>
> Disk: 2 Cylinders: 19452 Heads: 255 Sectors: 63 MB: 152586
>
> --PCyl N ID -----Rel -----Num ---MB --Start CHS- ---End CHS-- BS CHS
> 0 - 06 63 80262 39 0 1 1 4 254 63 B OK
> 0 - 07 80325268333695131022 5 0 1 16707 254 63 B OK
> Fdisk F6 sector 2547 0 1
> Fdisk F6 sector 2547 1 1
> 0 - 07 80325312416055152546 5 0 1 19451 254 63 BU OK
>
> ------FAT CHS -Size Cl --Root -Good -Rep. Maybe --Bad YY-MM-DD DataMB
> 0 1 2 79 2 512 79 0 0 0 04-11-17 7
>
> Partitions according to partition tables on second harddisk:
>
> --PCyl N ID -----Rel -----Num ---MB --Start CHS- ---End CHS-- BS CHS
> 0 1 DE 63 80262 39 0 1 1 4 254 63 OK
> 0 2*07 80325 268333695 131022 5 0 1 16707*254 63 OK OK
>
>
> Any ideas? Am I on the right track? I'm wondering if the drive is
> failing, based on the SMART errors.
I prefer the Everest display of SMART data myself. What does that say ?
.
- References:
- findpart "Fdisk F6 sector"
- From: MartyEgan
- findpart "Fdisk F6 sector"
- Prev by Date: findpart "Fdisk F6 sector"
- Next by Date: Re: SAA Drive failure...Help pls
- Previous by thread: findpart "Fdisk F6 sector"
- Next by thread: Re: findpart "Fdisk F6 sector"
- Index(es):
Relevant Pages
|
