Hard Disc linking
- From: nospam <nospam@xxxxxxxxxxxxxxxxxx>
- Date: Wed, 27 Jul 2005 22:33:01 +0100
Hi,
I have just installed a second hard disc (with no links, = slave) and all works perfectly.
I had to work out whether the boot disc was configured as a Master or as Drive select so I checked the documentation that came with the disc many years ago.
I was surprised as to how the boot disc is configured.
All works well was I didn't alter anything but I am left curious.
The boot disc is a Maxtor 5T030H3 and is linked as follows;
Link between Pins 1 and 6 Link between Pins 2 and 3
X = Pin O = No Pin
1 2 3 4 5 X X X O X X X X X X 6 7 8 9 10
The manual say for a master there should be a link between 1 and 6 but does not show any other links present.
Now all works fine so I was curious as to what the link between 2 and 3 is for.
Maybe it is just 'parked' there, this is making the assumption that pins 2 and 3 are earth pins.
Does anyone know the real reason?
Thanks
.
- Follow-Ups:
- Re: Hard Disc linking
- From: Peter
- Re: Hard Disc linking
- From: Arno Wagner
- Re: Hard Disc linking
- From: Rod Speed
- Re: Hard Disc linking
- Prev by Date: Re: SATA/IDE adapters and paging file performance
- Next by Date: Re: Hard Disc linking
- Previous by thread: Fan very near a Hard Drive
- Next by thread: Re: Hard Disc linking
- Index(es):
Relevant Pages
|