Re: New drive
- From: nospam <nospam@xxxxxxxxxxxxxxxxxx>
- Date: Tue, 26 Jul 2005 20:38:15 +0100
Thanks
for the info.
Rod Speed <rod_speed@xxxxxxxxx> writes
nospam <nospam@xxxxxxxxxxxxxxxxxx> wrote:craigm <none@xxxxxxxxxxxxxx> writesnospam wrote:Hi, I have just ordered a new drive, due tomorrow. I will add it to the slave connector and keep my current hdd (which has 3 partitions) as the boot drive. This one is just for extra storage. I assume it will come with a diagram to link it as a slave. Do I have to fdisk it? Do I then have to format it using the command format g: ? or will it all be done? Just plug it in and go! Thanks
The answer depends upon your OS and your hardware setup.
But, you may have to change jumpers on the drive. There may or may not be documentation with the drive, depending upon how you purchased it (OEM vs. retail package). You either need to be setup as the slave drive, or as cable select. That depends upon the existing drive and cable. Yes, you will have to 'fdisk' it. You will have to create a partition. The exact method depends upon your OS.
Yes, you will have to format the drive. It may not be G: however. This depends upon your operating system and how you setup your system and partitioned the drive.
It will not all be done because there is no way the manufacturer knows what OS you are using and how you want it partitioned and what file system you want. On the other hand it does not need to be difficult for you to do
If you specify the OS you have, what PC you have, how the original drive is jumpered and the type of IDE cable, and what you current partitioning and drive letters are, someone may be able to give you a specific answer.
You need to provide more information to get a useful answer.
Sorry
it is Win2k sp4
I have a 30 GB drive labelled as C: G: H:
I have two CD-ROM's labelled as D: E:
I bought the hard disk from the company I bought the PC from many years ago. a
web based retailer (http://www.cclonline.com).
Yes the new 120GB drive will start at label I: though if possible to avoid confusion I would like to start it at J:
You can change that letter in Win2K after you have partitioned and formatted it.
I was thinking of four 30 GB partitions.
Its generally better not to have lots of partitions per physical drive now.
It will work fine however.
The current 30 GB disk is obviously the boot disk but I don't know how it is linked. I guess as the master.
Yes.
Assuming hard disks have links on them in the 21 century. Cant they plug and play and work it out for themselves.
They can if jumpered for cable select.
Your original drive may or may not be, depending on how old the system is.
I'd check how the original drive is jumpered, and check that the new drive is jumpered cable select before you install it.
Guess not - probably cause more trouble than its worth.
Nope, it is in fact the simplest approach.
The current 30 GB disk is attached to the end of the ribbon cable and the plug
is marked master.
The ribbon cable plug that is in the 'middle' is marked slave.
Thats normal with a modern 80 wire ribbon cable.
I guess I just use the DOS command box to type fdisk and format J:
Its better done using Disk Management in Win2K.
are there any switches to the format command that I need?
Nope, and if you do it in disk management it will ask you to specify the format you want, NTFS or FAT32.
The disk is just for data.
.
- References:
- New drive
- From: nospam
- Re: New drive
- From: craigm
- Re: New drive
- From: nospam
- Re: New drive
- From: Rod Speed
- New drive
- Prev by Date: Re: Moving to RAID 0, Loose Data?
- Next by Date: Re: Loss of firewire drive & need to reformat
- Previous by thread: Re: New drive
- Next by thread: Re: New drive
- Index(es):
Relevant Pages
|
