Re: Can cable modems be connected directly to a network switch



On 20 Apr 2007 19:57:13 -0700, igniteyourlife@xxxxxxxxxxxxxxxx wrote:

hello have a 5 port network switch with 5 network ports and 1 uplink
port currently have cable modem plug directly into 1 of our 4
computers via a usb cable, which is the server and the other computers
share the internet through this computer via the switch. what we want
to do is plug the cable modem into the switch directly so the server
can be turned off or disconnected completely. but the other 3
computer can still access the internet. do we plug it in to the uplink
port or the normal port?. what cable do we use a network or cross over
cable?or do we have to buy a network router which we plug into the
uplink of our current switch

The utility of connecting a switch directly to a cable modem is dependent on
how many ip addresses are made available. It won't hurt to try, but unless
your broadband agreement includes multiple ip addresses, most likely only one
system will be able to connect to the internet in that configuration.

If you still want to try it, you can use a standard patch cable between the
modem and the uplink port on the switch. Then use standard patch cables
between switch and each end node.

The odds are you're going to end up needing a router appliance. Your "server"
is currently performing that function. You can pick up four port routers for a
modest sum - as little as free with discounts & rebates applied. If four ports
aren't enough, plug the uplink port on your existing switch into any of the
lan ports on the router...

Cheers

/daytripper
.



Relevant Pages

  • Re: Why has my local Ethernet packed up?
    ... gigabit hub and they do seem happy with it. ... I've also got a gigabit switch and a 10/100 hub (both unmanaged Netgear ... I got some new Ethernet cables. ... The port lights on the Gb switch are `on' where there is a cable running ...
    (uk.comp.sys.mac)
  • Re: Mogami responds, LV responds...again...
    ... Subject: TECHNICAL QUESTION ... Neutrik plug uses a reed switch. ... years to know) and other "stage funk" that cables ...
    (alt.guitar.amps)
  • Re: Network Topology
    ... Out of port 1, I have a cable going to a netgear gigabit network switch, to ... The "Uplink" port on a router is typically a straight-thru port to allow it ... You'll probably get GB performance between them; depending upon what cables you ...
    (microsoft.public.windowsxp.network_web)
  • Re: Cable Management vs. Easy Maintenance
    ... so that a jack that was on a non-PoE switch would be moved to a PoE switch ... So per classroom we need one PoE switch ... port and between 2 and 6 regular switch ports. ... When I mix PoE and non-PoE I color code the patch cables. ...
    (comp.dcom.cabling)
  • Re: Multihoming?
    ... plug the switch into the Lynksys box and leave it in a easy ... > cables under the house in a crawl space that's a bit too small for me. ... >>> Active Routes: ...
    (microsoft.public.win2000.networking)