This is embarrassing.....
- From: "Robert E. Watts" <no_one@xxxxxxxxxxx>
- Date: Sat, 6 Sep 2008 19:26:36 -0400
Hi GANG !
Well, this is about as embarrassing as it gets........
Long story short, the reason the computer would not allow me to "change"
the IDE HDD,
is because the cable was pulled out of the IDE connector on the motherboard.
No excuse.
I had installed about 5 or more drives in an attempt to answer a question,
and I guess the connection on the motherboard had finally had enough of my
fiddling, and semi-pulled out.
Moussa's VP diag disk revealed that no HDD was attached. Using my best Bruce
Willis smirk, I decided to open both blind eyes, and cast my snickering know
it all look at the actual hardware.
Let's just say, this was another in a long list of life's lessons.
Although I did find something else out because of this, which will actually
answer one of the main questions a poster had concerning this issue, I
should have known better.
Thanks for the help, and I will begin taking my dementia pills again. Or is
that anti-dementia ¿
sttawbob
--
boBWatts®©
EartH
Watts Carburetion Service
Whizzbang Computers
Official collector of: transfat asian plastic junk trinkets !
.
- References:
- ValuePoint reference disk
- From: Robert E. Watts
- ValuePoint reference disk
- Prev by Date: ValuePoint reference disk
- Next by Date: Another ValuePoint update
- Previous by thread: ValuePoint reference disk
- Next by thread: Another ValuePoint update
- Index(es):
Relevant Pages
|
Loading
