Re: Cableing question

I have had this problem before. Some baluns have different polarity.
If you have 2 baluns that you know work together and have tested them,
try using them on the connection you are trying to make. If it still
does not work then you know the problem is in the cables.

.

Relevant Pages

  • Re: Cableing question
    ... Mostly the Baluns uses the RJ45 cables for connection. ...
    (comp.sys.ibm.as400.misc)
  • Re: Cableing question
    ... I stand corrected...I am sure now they are making Baluns with Cat5 connections. ... You should have documentation on the Baluns you brought that will tell you the proper cable or types of cables connection you need to use the Baluns. ...
    (comp.sys.ibm.as400.misc)
  • Re: Cableing question
    ... Mostly the Baluns uses the RJ45 cables for connection. ... I have not heard that Baluns can use Cat5 cables since there are more 'wires' for 'networking' purposes. ... standard cat5 patch cable to the wall. ...
    (comp.sys.ibm.as400.misc)
  • Re: Speaker wire/HDMI Cable - OT
    ... Conduit is best. ... I would recommend running HDMI in metal, ... You can connect Baluns to them that will adapt to practically anything ... repeaters, expensive HDMI cables, Monster cables, and other fancy-pants ...
    (rec.motorcycles)
  • Re: over on uk.rec.audio there is an argument going on;!..
    ... When David Looser asked "how much of a TV antenna is ... Or do all the baluns have a center tap from ... The centre conductor of the coax is directly connected to one side of the dipole. ... Thus the inner of the feeder usually has metallic connection to the dipole whereas the outer connection is usually floating, ...
    (uk.tech.digital-tv)