Re: disk failure

JHL wrote:

9406-170 with 2x4gb disk mirrored and 6x8gb disk raid 5.

if i run a wrkdsksts all 8 drives show activity. i/o.

but if i do a cmd 11 5 of the 6x8gb show dpy/unprotected and 1
says dpy/failed.

so it seems that a disk has failed yet all 8 show activity.

anyone explain ? tia
You have 1 disk that was part of a raid-set that stopped working, therefore the
raid protection stopped too, so the raid status shows that 5 disk are running
but are no more protected by the raid itself.
Call HW support immediately, if another disk stops you'll lose the whole system.

--
Dr.Ugo Gagliardelli,Modena,ItalyCertifiedUindoscrasherAñejoAlcoolInside
Spaccamaroni andate a cagare/Spammers not welcome/Spammers vão à merda
Spamers iros a la mierda/Spamers allez vous faire foutre
Spammers loop schijten/Spammers macht Euch vom Acker
.

Relevant Pages

  • Re: Building a file server - advice please
    ... > connecting up 5 drives in a RAID5 system does not affect the Mean Time To ... > important reason to use a RAID system. ... Hardware controllers generally can have an additional spare disk configured ... Hardware raid presents each raid array to the host as one disk, ...
    (comp.os.linux.setup)
  • Is it HighPoint, is it Seagate, or is it Windows 2000 Professional
    ... Then I tried to boot my system: Windows reported ... Barracuda disk running off a HighPoint HPT370A RAID ... never new that my drives were set up this way. ...
    (microsoft.public.win2000.setup)
  • Re: Is it HighPoint, is it Seagate, or is it Windows 2000 Professional
    ... As you've discovered Raid 0 has no fail safe redundancy, ... Then I tried to boot my system: Windows reported ... Barracuda disk running off a HighPoint HPT370A RAID ... never new that my drives were set up this way. ...
    (microsoft.public.win2000.setup)
  • Re: Paul and Old Man: Cannot fix RAID5 failure ...
    ... all of the sudden the Intel Matrix Storage ROM showed Rebuild status. ... When booting form RAID, there is some activity while the screen is black, ... Considering 3 SATA drives spining up after powerdown may cause a 12V ... I was considering a parallel WinXP installation on a 4th disk, ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Paul and Old Man: Cannot fix RAID5 failure ...
    ... Considering 3 SATA drives spining up after powerdown may cause a 12V ... Now I need to concentrate on raid array or data recovery (if still ... I removed the drive reported in error, no boot or rebuild. ... I was considering a parallel WinXP installation on a 4th disk, ...
    (alt.comp.periphs.mainboard.asus)