Re: Scratch install
- From: "Michael Anderson" <michaelpanderson@xxxxxxxxxxx>
- Date: Wed, 7 Dec 2005 00:06:11 -0500
What model of AS/400 is this?
Do you know the type of CD-ROM drive? Should be either a 6320 or 6321.
What cut of the LIC CD is this? Should say RS?
-Mike
<compctech@xxxxxxxxx> wrote in message
news:7KSdnVmmFZggUg3eRVn-rA@xxxxxxxxxxxxxxx
> V5R1M0
>
>
> "René H. Hartman" <sorry@xxxxxxxxxxx> wrote in message
> news:439099b4$0$752$5fc3050@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> > Hmmm...
> >
> > Either the drive is not reading the CD, or you haven't got the LIC CD
> > in, or maybe you have a too new LIC CD for your hardware. Forgot what
> > the box was, sort of remember a 500. These stopped marketing in '98,
> > with end of upgrade path in 2000. The 600 was newer, but cannot handle
> > anything over V5R1. So maybe the 500 never made V5.
> >
> > OK, just found that V5R1 does run on a 500, so that was likely the last
> > release supported.
> > What OS version do you have on CD?
> >
> > --
> > Best regards,
> >
> > René H. Hartman
> > www.hac-maarssen.nl
> >
> >
> > <compctech@xxxxxxxxx> schreef in bericht
> > news:sb6dnXv4k4UO6Q3eRVn-hw@xxxxxxxxxxxxxxx
> >> Yes I do get the SystemAttetion light.
> >>
> >> "René H. Hartman" <sorry@xxxxxxxxxxx> wrote in message
> >> news:4390596d$0$709$5fc3050@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> > <compctech@xxxxxxxxx> schreef in bericht
> >> > news:tZidnVZJ8OoUbhLenZ2dnUVZ_tydnZ2d@xxxxxxxxxxxxxxx
> >> >>
> >> >> "Laurence" <worldwide607@xxxxxxxxxxx> wrote in message
> >> >> news:1133408094.792487.218690@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >> >> > Did you put the internal code CD on your CD-ROM?
> >> >> >
> >> >> > This error code (B1xx 4507) means:
> >> >> > These reference codes appear if the tape device for the alternate
> >> > IPL
> >> >> > was not found or was not ready. Make sure the tape device is
> > powered
> >> > on
> >> >> > and the correct tape is loaded and ready. To make tape devices
> >> > ready,
> >> >> > you might need to open and close the tape device door.
> >> >> >
> >> >>
> >> >> I don't have a tape drive. How do I get pass this error.
> >> >>
> >> >>
> >> >
> >> > Normally if the system cannot find the alternate IPL device it
> > should
> >> > fall back to the primary install device. Sometimes it will tell you,
> > but
> >> > not always. But, if there's a CD in the drive it'll always try to
> > boot
> >> > from CD. You can see that by watching the CD front panel LED. During
> > IPL
> >> > this should be blinking. If not, the CD drive is not recognized and
> > if
> >> > ther's no tape either, de IPL will fail. Do you have SystemAttention
> > on?
> >> > It's the small yellow LED with the stylic lightning bolt next to it.
> >> >
> >> >
> >> > --
> >> > Best regards,
> >> >
> >> > René H. Hartman
> >> > www.hac-maarssen.nl
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >>
> >
> >
>
>
.
- Follow-Ups:
- Re: Scratch install
- From: compctech
- Re: Scratch install
- References:
- Scratch install
- From: compctech
- Re: Scratch install
- From: Laurence
- Re: Scratch install
- From: compctech
- Re: Scratch install
- From: René H. Hartman
- Re: Scratch install
- From: compctech
- Re: Scratch install
- From: René H. Hartman
- Re: Scratch install
- From: compctech
- Scratch install
- Prev by Date: Re: ILE/C variable name of API (as in RPG)
- Next by Date: Re: RPGLE, JAVA en STDOUT
- Previous by thread: Re: Scratch install
- Next by thread: Re: Scratch install
- Index(es):
Relevant Pages
|