Re: Battery Charge in hp48g

On Aug 30, 7:35 pm, SebasMagri <sebasma...@xxxxxxxxx> wrote:
Hi...
Is it possible to know the level of charge in the batteries of the
HP-48?
If yes, What`s the command or instructions to do it?



No software listed Here for the 48 series to do so other than some
which apparently monitors the low battery warning. That would not
however quantify the battery condition as software for the ARM
processor calculators can.

http://www.hpcalc.org/

That is presumably a flag setting but I could not find a listing for a
low battery flag # for the 48 series.

Rich Wood

.

Relevant Pages

  • Re: Supercharging Lithium Ions
    ... A Sennheiser wireless musical instrument transmitter reads low battery ... when it sees 1.3 volts, and starts blinking at 1.1 volts. ... read the same low voltage as the rechargables. ...
    (alt.autos.toyota)
  • Re: computers review
    ... Snit wrote: ... I know it had to do with a Leopard install that I did... ... I'm currently trying a battery recalibration process that I ... you will see the low battery ...
    (comp.sys.mac.advocacy)
  • Re: Fujifilm FinePix E900 digital camera
    ... quickly drop through 1.2v (which is the nominal voltage of NiMh). ... battery indicator on your camera. ... shots and the low battery indicator comes on, but you can take 10 to 20 ... With NiMh the low battery indicator comes on and you are ...
    (rec.photo.digital)
  • Re: HP50g wireless starts on by itself
    ... The ) annunciator is used both for "due" timer reminder alarms ... and in HP48 series it also reports low battery levels ...
    (comp.sys.hp48)
  • Followup Re: Starter question (engaging)
    ... > When a starter spins without engaging with a low battery but ... (Battery checks out OK, ... Turned out to be the solenoid. ... When I pulled it off the starter, ...
    (rec.motorcycles.tech)