Re: 35s Anomalies
- From: richwood <astronut1001@xxxxxxxxx>
- Date: Thu, 30 Aug 2007 11:43:46 -0700
On Aug 30, 11:15 am, Dieter <didis.mehl...@xxxxxx> wrote:
Joel Kolstad wrote:
[ Raymond Del Tondo wrote ]
A complete entry of E 2 Enter on all except the 35s puts 100 in X orYes, It also encountered this weird behaviour of the 35s.
level 1. As noted, on the 35s this causes a syntax error as soon as
Enter is pressed.
Wouldn't have been too difficult to implement...
Indeed.
ACK. Has there been any other HP before that required a mantissa and did
not assume 1 if none was entered?
Dieter
Dieter;
None I know of but I have not tried the 33s or pre 41C design HP LED
units. I tried this on a original 20S, 41CV, 42s, 48SX, 48GX and 50G
calculators without error and with 1 both assumed and automatically
entered. The 48GX units included one with the normal operating
system and one with the Meta Kernel ROM card installed.
I remember though that the HP 67 and 97 allowed program data entry of
E 3 for example and the program interpreted it as 1000, saving 2
program steps. The 41C's compatibility software built into the card
reader had to take account of this in translating HP67 programs read
from HP67 magnetic cards .
On my old Commodore LED RPN unit the 1 entry is required to even
enable exponent entry ;-)
Rich W
.
- Follow-Ups:
- Re: 35s Anomalies
- From: Dieter
- Re: 35s Anomalies
- References:
- 35s Anomalies
- From: richwood
- Re: 35s Anomalies
- From: Raymond Del Tondo
- Re: 35s Anomalies
- From: Joel Kolstad
- Re: 35s Anomalies
- From: Dieter
- 35s Anomalies
- Prev by Date: Re: Evaluate a path in the custom menu
- Next by Date: Re: Anyone knowing PPC-Danmark here ?
- Previous by thread: Re: 35s Anomalies
- Next by thread: Re: 35s Anomalies
- Index(es):
Relevant Pages
|