Re: Network printing

Sounds like it shouldn't be so much of a port as you would need a
gateway and a NAT.

Although my guess would be 23 and/or 9100, presuming the printer is on
an HP Jetdirect Card.

So, did it get ugly before or after the NPCONFIG change?


Tracy Johnson
Business Analyst
Measurement Specialties, Inc.
1000 Lucas Way
Hampton, VA 23666
Office 1-757-766-4318
tracy.johnson@xxxxxxxxxxxxx
www.meas-spec.com


-----Original Message-----
From: HP-3000 Systems Discussion
[mailto:HP3000-L@xxxxxxxxxxxxx] On Behalf Of Craig Lalley
Sent: Tuesday, August 11, 2009 11:48 AM
To: HP3000-L@xxxxxxxxxxxxx
Subject: Re: [HP3000-L] Network printing

What ports need to be open so the HP3000 can print to a
printer on the other side of the firewall?

-Craig


* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

.

Relevant Pages

  • Re: NTP and NAT
    ... This is not so much an NTP question as a NAT question. ... The original source IP address and port are remembered along with the ... comes back to the translated source IP address and port, the gateway knows ...
    (comp.protocols.time.ntp)
  • Re: 2000, NAT & port forwarding...
    ... see the mapping happening in NAT --> Show mappings? ... gateway: a.b.c.62 ... I installed NAT and added to INET´s Special Ports ... Incoming port: 80 ...
    (microsoft.public.win2000.ras_routing)
  • Re: Watching traffic on a port
    ... There are a number of free and commercial TCP/IP Packet Sniffers and that ... I need to watch network traffic coming in on a specific port. ... To join/leave the list, search archives, change list settings, * ... The message was checked by ESET Smart Security. ...
    (comp.sys.hp.mpe)
  • Re: port scan?
    ... I would make the recommendation that you get GFI's LanGuard tool for a ... disorientated " are performing more than just a port scan... ... * To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)
  • Re: LPQ Printer NIC Lost
    ... is powered by, a Centronics port. ... If the NIC fails it will only know the Parallel port. ... To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)