FW: [HP3000-L] network oddity again...

-----Original Message-----
From: james hofmeister <james.hofmeister@xxxxxxxxxxx>
Sent: Thursday, July 24, 2008 4:57 AM
To: John Pitman <jpitman@xxxxxxxxxxx>
Subject: RE: [HP3000-L] network oddity again...

Hello all,

Could not initalize data in path TCP...

Just a fyi this error is telnet barking when a connection is opened to it's port and the tcp connection is broke while mpe is in the process of creating ci data structures and displaying the ':' prompt.

P.s. Don't forget to replace your mpe ':' cartridge before you run low (yes very little humor so early in the am).

regards, james hofmeister
big thumbs, little motoQ9 keyboard, my other desktop is ubuntu with evolution and open office!
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

.

Relevant Pages

  • Error when FTPing
    ... FTP site via explorer and a unix system but cannot via this MPE (which I've ... back with a connection failure message. ... it shows them coming in on port 21 but then it just says 'connection ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Duplex
    ... You also have to make sure that if you are hooked up to a router that you have the network connection set all the way through from end to end nailed at 100MB. ... I set the NMMGR settings to turn off auto-negotiate and turn on full duplex. ... Transmits 11119 Receives unicast 7538 ... To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)
  • Re: Log of IP Connections?
    ... Behalf Of Timothy Atwood ... - what is local IP and what is remote IP (connection box) ... * To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)
  • Re: Identify Path
    ... Have you run ODE and MAPPER2 to determine the path? ... Are you sure that it is 10 Mbps, ... find anything in sysgen or in mapper about this slower connection. ... To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)
  • Re: Identify Path
    ... Is the 10Mbps connection in the middle of the box, ... Then it is the GSP port. ... To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)