Re: HP B132L workstation and monitor choices?

Ben Myers <ben_myers_spam_me_not @ charter.net> wrote:
On 5 Jun 2006 12:13:00 -0700, "Tank" <rgaudet@xxxxxxxxxxxxxxxx> wrote:
I have a customer with and old HP B132L workstation that he was
using a Viewsonic VG910S series monitor. This monitor failed and he
put a Viewsonic VP920B model on with no luck. The system would not
display anything with that unit connected. Talked to HP and they do
not have anything for me. Is there some current monitors that could
be purchased that will work with these older workstations?

I am surprised that the Viewsonic VP920B did not work. I would
think that most any modern 19" multisync monitor would be OK. It
needs to support the frequencies emitted by the B132L. Get the
specs for the VG910S, and make sure any replacement monitor meets or
exceeds the horizontal and vertical frequency ranges of the
VG910S... Ben Myers

Perhaps there is some "Tab" key pressing required at startup? IIRC
that was how one got the workstation to cycle through the frequencies.
Might even still be a B132L manual online under docs.hp.com, but I've
not looked for one in a while.

rick jones
--
oxymoron n, commuter in a gas-guzzling luxury SUV with an American flag
these opinions are mine, all mine; HP might not want them anyway... :)
feel free to post, OR email to rick.jones2 in hp.com but NOT BOTH...
.

Relevant Pages

  • Re: Building new PA system in stages
    ... sound company and pay them to hump the gear. ... The battle after that was to get them to stop using the Behringer Feedback ... The second problem is leaving filters open to pick up more frequencies as ... monitor and mic be placed in a position that did *not* correspond to the ...
    (alt.guitar.bass)
  • Re: Building new PA system in stages
    ... sound company and pay them to hump the gear. ... The battle after that was to get them to stop using the Behringer Feedback Destroyer. ... The second problem is leaving filters open to pick up more frequencies as you play. ... The guitarist insisted his monitor and mic be placed in a position that did *not* correspond to the dead spot on that mic's polar pattern. ...
    (alt.guitar.bass)
  • Re: Overclocking in Dell
    ... > IN a monitor, ... More a case that the frequencies it's happily following allow the HT ... But this assumes that the line sync present on the input is the sole ... switch PC off first etc.) and the oscillator wandered off ...
    (comp.os.linux.misc)
  • Re: Monitor Squeal
    ... very sensitive to high frequency noises. ... that the monitor begins to squeal after it has been on for some ... Try the SVGA driver out for noise too. ... >> frequencies at which the HT transformer is working. ...
    (comp.os.linux.questions)
  • Re: Newbie legal/detection questions
    ... >their headquarters monitoring the first-responder's frequencies. ... >I monitor THEM too... ... >The other thing, most 'stringers' carry their own portable scanners, ... >Community watch groups and civilian security patrols most use them to ...
    (rec.radio.scanner)