HP C200 doesn't boot after install a PCI card

Hello- I've tried to install a Scramnet+ SC150e PCI card in a HP C200
workstation, but the machine doesn't boot. I don't receive any message
on the screen.
I've tried to use all the slots, with & without the graphic card, etc.
I ve updated the firmware version to 6.3 (I think this is the las one),
with the same result.

Any idea?

Regards,
JMS

.

Relevant Pages

  • Module error message at boot process
    ... I have installed fc6 on a workstation with an scsi adapter (pci card) ... for a scanner. ...
    (Fedora)
  • Re: BLUE SCREEN OF DEATH ON BOOT
    ... > When you tried the drive in another computer were you able to boot all ... > button in the Startup and Recovery section. ... I have recently installed a wireless PCI card, but i remeoved it as soon as ... the crashes began. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Promise RAID card and booting
    ... (it's a pci card by the way) ... > You may also need to change the boot device to SCSI in the BIOS. ... you want to review the contents of the RAID bios. ...
    (microsoft.public.windows.server.sbs)
  • Re: help or recomendation for PCI-express graphics card
    ... stage after installing fedora 7 -it installs ok without error messages ... using an old matrox millennium G something pci card, ... Is there a way to get it to boot in text mode in case the default screen ...
    (Fedora)
  • New build A8N-SLI / x800gto - no boot
    ... Arctic Cooling 64 HSF ... Trying to boot, I get fans, but no screen. ... an old PCI card and got the same result. ... connector and ASUS EZ plug. ...
    (alt.comp.periphs.mainboard.asus)