Re: Static screen C64

algon@xxxxxx wrote:
Hi, I got a breadbox C64 that won't start up anymore. When I turn on
the machine, the red led is lit but nothing much else happens. It
won't even produce a black screen, just the same static TV screen as
if nothing had happened. I've tested tuning the TV channels to every
possible setting, to no avail. Also, blind type commands don't seem to
work so it's probably more than just the picture that's gone wrong.
I've read of many failures that cause a blank screen as a symptom,
what exactly does this blank screen mean? Is it a empty black screen
or, like in this situation, no picture at all. Do you know what could
cause these symptoms?

thx,
Algon

I think the power supply can cause this if the 9 Volt ac is missing and I think the PLA can also cause it. Did you try a cartridge?
Check out Ray's web site. http://personalpages.tds.net/~rcarlsen/
.

Relevant Pages

  • Static screen C64
    ... I got a breadbox C64 that won't start up anymore. ... the red led is lit but nothing much else happens. ... work so it's probably more than just the picture that's gone wrong. ... I've read of many failures that cause a blank screen as a symptom, ...
    (comp.sys.cbm)
  • Re: 45" Pioneer projo model:SD-P4571K/KC
    ... flashing picture with no audio and lines running across screen (left to ... This occurs on video inputs as well as tuner inputs. ... Replace C129 on power ... Symptom: No tuner video/audio All other inputs ok. ...
    (sci.electronics.repair)
  • Re: Sony KV32 CRT fault
    ... I've seen this symptom when the caps in the HV section go bad ... If the picture was still sharp, ... on with pronounced flyback lines. ... After a couple of minutes of use the black level settles but is still raised ...
    (sci.engr.television.advanced)
  • Re: Green LED on Palm IIIxe
    ... The flip cover even has a hole so this LED can be seen when the device is closed. ... We've never seen it lit. ... I'll ask my friend to send me a picture when he comes back from holidays next week. ...
    (comp.sys.palmtops.pilot)
  • Re: Crop command not lit
    ... Echo [MS PPT MVP] ... > icon on the Picture toolbar ws the only icon that wasn't lit. ... >>> Why is the crop command not lit on my picture tool bar in Power Point? ... >> and pictures which are fills of AutoShapes and not for grouped objects. ...
    (microsoft.public.powerpoint)