Re: OPENCBM & GUICBM4WIN

Hello Mark,

personable85 schrieb:
I appreciate your help, but I do not have the patients to continue
with this project. My purpose is to work with my PETs, not OPENCBM. I
have lost faith that OPENCBM will ever work for me. Although, I may
try using the XA1541 cable to see if that works. In the meantime, I'm

yes, that would have been my next best
recommendation, but I wanted to get any hard
indication that your issue is caused by a
cable incompatibility rather than something
else.

going to explore other ways of transferring PET programs. If you'd
like, I'd be happy to send you my XM1541 cable. I have no use for it
anyway. It would allow you to find out more easily if the cable is
working properly or not.

It would be of no use for me to collect just
another cable, see my huge tester's collection
over here:
http://d81.de/R.I.P/Xcables.shtml

And recently 20 new PCB based XAP1541
prototypes have been added.

And then I don't see the possibility to find
out much about the _incompatibility_ between
the cable and your system.

Well, sure, it _could_ be that your cable is
defective or that it does use the wrong
component's type or such.


If you find someone in your neighborhood or
in the US in general, shipping may get a lot
cheaper than sending to old Europe.

Again, I want to thank you for everything
that you've done for me. Sie haben Wunderbar sein!
Vielen Dank!

On one side I regret that I wasn't able to
be of help in time. It is always of some use
for myself and the teams I'm working in to
gain some feedback about the usability of
transfer software. It would have been a
valuable information what exactly is/was the
issue between your Compaq Presario, the used
cable(s) and different software.

On the other side I fully understand your
time limitations as you said in the very
beginning of this thread.
If I would have had the possibility to
personally jump over to you along with my
collection of cables, a multimeter and some
other tools, I'm very sure we would have
solved that task within an hour.

There wasn't such a possibility and simply
looking for alternative PET transfer solutions
is the next best thing your can do. There are
a few and the next best one coming to my mind
is Marko Mäkelä's and Nicolas Welte's: C2N232.


Bye and I wish you all the best success, Womo
.

Relevant Pages

  • Re: A Bewildering Array of HDMI Cable Choices
    ... jim evans wrote: ... Are you saying is just as good as this one they sell for $24 ... I thought because in-wall cables were fairly well ... Especially when pets are about. ...
    (alt.tv.tech.hdtv)
  • OPENCBM Problem Solved!
    ... This is a reposting of the original message I listed in OPENCBM & ... The XM1541 cable not working with OPENCBM. ... I also want to thank Vintage Computer Cables. ...
    (comp.sys.cbm)
  • Re: OPENCBM & GUICBM4WIN
    ... If you have a Compaq Presario SR1500NX with a Mainboard Asus A7V8X-LA ... OPENCBM, for their time and patients in helping me to solve my problem ... I also want to thank Vintage Computer Cables. ...
    (comp.sys.cbm)