Re: Broken RF Modulator on C64 - Need advice
- From: "KilrPilr" <commdore128@xxxxxxxxxxxxxxxxx>
- Date: Tue, 06 Dec 2005 00:24:57 GMT
Mobo stands for motherboard. Sorry I have a bad habit of shortening up
words.
--
Leo
Im looking for Commodore 64/Vic20 Cartridges! Got any? Check out my
tradelist & items for sale at http://www.commodore64.allhell.com
<r_u_sure@xxxxxxxxxxxxxxx> wrote in message
news:1133823402.519945.239200@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> KilrPilr wrote:
>> Hi Stefan,
>> Why not just swap in the good keyboard into the good computer case?
>> I believe old and new kboards have the same plug in and work the
>> same. I would do that or swap chips off the good board onto the bad
>> board until either it works or you swap them all back and go with the
>> keyboard swap. :D Also u could swap the mobo of the good computer
>> into the case of the bad mobo or vice versa. Whichever u would prefer.
>> I would try that over trying to desolder the rf modulator and such.
>
> Somebody tell me what a MOBO is.
>
> A master electrician showed me this trick. You don't even need
> to unscrew the keyboard if the upper outer shell of the one C64
> fits the lower shell of the other. Of course, one unit will
> have the same electronics except for the keys. The other unit
> has a canabalized upper unit with a malfunctioning video signal.
>
> Have you tried connecting the round 5 or 8 pin A / V port of the
> C64 with the bad video signal to the input dubbing jacks of a VCR?
> If that doesn't work, then you may have bigger problems than you
> think. I'll let the electronic honchos her help you with that problem.
>
.
- References:
- Broken RF Modulator on C64 - Need advice
- From: Stefan Nyberg
- Re: Broken RF Modulator on C64 - Need advice
- From: KilrPilr
- Re: Broken RF Modulator on C64 - Need advice
- From: r_u_sure
- Broken RF Modulator on C64 - Need advice
- Prev by Date: Re: DTV in Toys R Us
- Next by Date: Re: DTV in Toys R Us
- Previous by thread: Re: Broken RF Modulator on C64 - Need advice
- Next by thread: Re: Broken RF Modulator on C64 - Need advice
- Index(es):
Relevant Pages
|