Re: WriteATR


"Jack Tseng" <> wrote in message news:

WriteATR writes the 5.25 disk as Atari Double Densityin PC drive, MSDOS
can
not read the disk. How does it read ? Can the real Atari 130XE computer
hooked up to PC drive that can read Atari Double Density without Indus GT
or
US Double 1050? I have the SIO2PC/ProSystem for the serial port.

Thanks!
Jack
I'm guessing you want to make some Atari disks from
ATR images, to use with an Atari disk drive (1050, Indus, etc.)
If that's the case, use APE or SIO2PC and just sector copy the ATR image
from APE to floppy. Use a DOS
for this. MyDOS, FTeDOS. There's a copy whole disk in MyDOS. For FTeDOS
(SpartaDOS), boot the image, and at the D:> prompt type SCOPY D2: D1:
(assuming you have SCOPY). Or boot Disk Wizard II and use the Backup
feature, making sure your densities are set properly.


.