Re: ][ Board only

On Feb 4, 5:20 pm, Eric Smith <e...@xxxxxxxxxxxx> wrote:
Michael J. Mahon wrote:
I've seen Apple main boards attached to a plywood base, along with a
power supply and a keyboard--no sides or top.  It's called an "Apple
on a stick".

That's what I was using from 1982 to 1987.  I was too cheap to buy a
normal Apple II+, so I bought a logic board as a service part (Apple
had long since stopped selling the board separately as a product).
The least expensive switching power supply I could find at the time was
made by Power General, if memory serves.  I bought the keyboard (sans
encoder) also as a service part, and used a Videx Keyboard Enhancer II.

I didn't attached the keyboard to the same base, though.  I built a
custom wedge-shaped wooden case for it.

I bought two disk drives and a controller from JDR.  They were basically
clones of the Disk II.  At the time, half-height drives were appearing,
but still cost more than full-height.  Some of the clone drives didn't
work well with all of the copy-protection schemes.  Most of them could
deal with half-tracks, but since the seek profiles were different they
had trouble with spiral-track schemes.

I didn't get my first "real" Apple II until 1994 or so.

I did the same thing in late '83. I was working for an Apple
dealer, I bought their spare //e MB, power supply and keyboard. I
found a Wang dual cassette interface box, mounted the MB. power supply
and the 2 floppy drives went where the cassette drives were. Put in
some toggle switches to turn off the write protect switches, toggle
from enhanced to enenhanced, etc... I also found a Wang keyboard
casing, and mounted the //e keyboard it, and had a 34 pin cable
running from the keyboard to CPU box.

The keyboard has Rockwell board with a 7 segment 4 displays, I
hooked it up so I had a clock and timer built onto the keyboard, and
even had temperature sensors inside the CPU box. I forget what all
the features the Rockwell board had.

I still have this piece in my warehouse. Doesn't look as nice as it
once did, but it still works, or it should. I eventually added two
3.5" floppy drives, which are still with the unit. Maybe some day
I'll drag it home, clean it up, and take some photos of it. I saw
some photos the other day of when it was new, maybe I'll scan them as
well.

Raymond
.

Relevant Pages

  • Re: Results of "For the fun of it"
    ... I may not have bought my Apple II+ in 1982, but then as a senior in ... disk drives and privately manufactured cases for them (together ... Apple system. ... one can safely predict that college will keep going up. ...
    (comp.sys.apple2)
  • Re: ][ Board only
    ... It's called an "Apple ... I bought the keyboard (sans ... encoder) also as a service part, and used a Videx Keyboard Enhancer II. ... I bought two disk drives and a controller from JDR. ...
    (comp.sys.apple2)
  • Re: ][ Board only
    ... It was the first Apple Computer that I ever saw. ... I bought only 32K, bringing my machine up to 36K. ... Bill H wrote: ... include case, keyboard, power supply or game paddles. ...
    (comp.sys.apple2)
  • Can I Assign "My Computer" to a Keyboard Favorites Key?
    ... Bought a new keyboard last week and just today discovered it doesn't have a ... "My Computer" (opens to show all my drives) key. ... The new keyboard is MS ...
    (microsoft.public.windowsxp.general)
  • Re: For the fun of it
    ... Post your current age and the first computer you ever used. ... The first computer I used was an Apple II+ in highschool '82. ... My first computer was a II+ clone that I bought around 1986. ... for a year or two before the drives started misbehaving (probably only ...
    (comp.sys.apple2)