Re: Looking for GS-RAM+ GSPLD1A.1 Chip

Thanks, I just shot him an email, so hopefully he'll have one.

Yes, I do! Return email coming.


I have both types. Henry would be the better choice, but if he
doesn't have one, I can probably burn you a copy....but i'll have to
set up an eprom burner...etc...

Would you find that darn Advin already!

Just a side note - The files are on the Web Server
http://www.downloads.reactivemicro.com. Here's the directory for the
GS-RAM+:
http://www.downloads.reactivemicro.com/Public/Apple%20II%20Items/ROM_and_JEDEC/GS-RAM_Plus/.
Of course you'll need a programmer that can program the IC and the IC itself
for those files to be of any real use. But they are there at least.

Now if I can just track down one last bug in the Store I'll list all the
items once again. Sorry for the delay.


--
Henry S. Courbis
www.ReactiveMicro.com
Legacy Hardware and Support - Come take a look at what we have to offer!


.

Relevant Pages

  • Re: EPROM Programmer
    ... >> I recently acquired an EPROM programmer that plugs into my printer port ... The software allows me to take all the hex info off one chip and ...
    (sci.electronics.basics)
  • Re: Eprom Burning successful!!!
    ... Hey Charles, are you using a commie based programmer, or a PC based ... have ROM files that you have dumped on a commie, ... this removes the load address out of the CBM file. ... access to the REAL eprom, then this is not a problem, you simply read ...
    (comp.sys.cbm)
  • Re: EPROM Programmer
    ... I breadboard the EPROM for reading, and hook up a 4-bit binary ... > I recently acquired an EPROM programmer that plugs into my printer port on ... The software allows me to take all the hex info off one chip and ... or edit the hex info as I guess most ...
    (sci.electronics.basics)
  • Re: EPROM Programmer
    ... > I recently acquired an EPROM programmer that plugs into my printer port on ... The software allows me to take all the hex info off one chip and put ... > my EPROM programmer without getting deeply involved integrating a processor? ...
    (sci.electronics.basics)
  • Re: EPROM Programmer
    ... > I recently acquired an EPROM programmer that plugs into my printer port on ... The software allows me to take all the hex info off one chip and ... or edit the hex info as I guess most ...
    (sci.electronics.basics)