Re: Power adaptor for apple iic
- From: "David Wilson" <mcs6502@xxxxxxxxx>
- Date: 27 Jun 2006 21:33:54 -0700
Mark Frischknecht wrote:
Well a //c uses a 15vdc 1.2amp 18watt brick plus it has a unique power
plug. But if you can find a 15vdc power adapter with at least a 1.2 amp
rating and you make a custom plug on it then you should be fine.
The plug is not that difficult to find - it is a 7 pin DIN female line
connector. Hmm, my local suppliers no longer list it. I think this
might work as a 7 pin DIN plug should fit 8 pin DIN socket.
http://www.jaycar.com.au/productView.asp?ID=PS0358
The power supply voltage is not that critical either - I will have to
check my copy of the IIc Technical Reference Manual but 12-15V is
definitely OK and probably up to 20V would not cause problems. The
major problem is the current rating - you need a big plug pack if it is
a linear unit or a decent switchmode plug pack.
.
- Follow-Ups:
- Re: Power adaptor for apple iic
- From: Linards Ticmanis
- Re: Power adaptor for apple iic
- From: Mark Frischknecht
- Re: Power adaptor for apple iic
- References:
- Power adaptor for apple iic
- From: csabai
- Re: Power adaptor for apple iic
- From: Mark Frischknecht
- Power adaptor for apple iic
- Prev by Date: Re: Which assembler?
- Next by Date: Re: Which assembler?
- Previous by thread: Re: Power adaptor for apple iic
- Next by thread: Re: Power adaptor for apple iic
- Index(es):
Relevant Pages
|