Re: -Hard-Drives w/vulcan?
- From: "Bill Garber" <willy46pa@xxxxxxxxxxx>
- Date: Thu, 10 Nov 2005 03:14:47 -0500
"Michael J. Mahon" <mjmahon@xxxxxxx> wrote in message
news:vLCdnRgRptZWa-_eRVn-pg@xxxxxxxxxxxxxx
> Yowch! Try switching to a monospaced font when attempting columns--
> those are pretty mangled.
Any proportional font should do it. Courier New is what I use.
> Still, the info is there...and a little disappointing, since there's a
> PAL that will make reverse engineering much harder.
PAL? a problem? and you can't write to MS-DOS disks on a IIgs
either I guess. Didn't I mention that we've already converted
PAL to GAL for the Rev"C" SCSI card? Oops, don't think so. :o)
> Chip 1 is an 'LS86 (not B6). All pretty standard stuff except for the
> PAL, but an interesting mix of logic families! The card must be gating
> and buffering some signals while trying to delay them as little as
> possible.
Thought that kind of looked like a B, and not 8. :o)
> [ snipped out irrelevent info ]
Bill Garber
.
- Follow-Ups:
- Re: -Hard-Drives w/vulcan?
- From: Michael J. Mahon
- Re: -Hard-Drives w/vulcan?
- References:
- Re: -Hard-Drives w/vulcan?
- From: Sean Fahey
- Re: -Hard-Drives w/vulcan?
- From: brad
- Re: -Hard-Drives w/vulcan?
- From: Sean Fahey
- Re: -Hard-Drives w/vulcan?
- From: Bill Garber
- Re: -Hard-Drives w/vulcan?
- From: brad
- Re: -Hard-Drives w/vulcan?
- From: Bill Garber
- Re: -Hard-Drives w/vulcan?
- From: brad
- Re: -Hard-Drives w/vulcan?
- From: Sean Fahey
- Re: -Hard-Drives w/vulcan?
- From: brad
- Re: -Hard-Drives w/vulcan?
- From: Michael J. Mahon
- Re: -Hard-Drives w/vulcan?
- Prev by Date: Re: -Hard-Drives w/vulcan?
- Next by Date: Re: -Hard-Drives w/vulcan?
- Previous by thread: Re: -Hard-Drives w/vulcan?
- Next by thread: Re: -Hard-Drives w/vulcan?
- Index(es):
Relevant Pages
|
Loading