Re: Romboard or rombox schematics !

Hi!

The RRB cannot burn eproms. But be assured: after having tried a RRB you surely will never want to get back to "normal" eproms! A 512KB-version can hold up to 32 "roms". That should be enough for pretty much everything one could imagine... :-)

Regards,
Nicolai


Gilles wrote: 
Thanks people !

I've heard of the Inicron board but I didn't know it had a socket for an Eprom chip too.
Is it possible then to burn this eprom onboard too (i.e. does the Inicron board incorporate an Eprom burner ?) ?
If so, is it then possible to transfer data from one of the rams and burn the Eprom from one of the RAMs chip ?

Anyway, looking forward to receive any documentations you people may have !

Thanks in advance.

Gilles



.

Relevant Pages

  • Re: Looking for GS-RAM+ GSPLD1A.1 Chip
    ... I can probably burn you a copy....but i'll have to ... set up an eprom burner...etc... ... Of course you'll need a programmer that can program the IC and the IC itself ... Now if I can just track down one last bug in the Store I'll list all the ...
    (comp.sys.apple2)
  • Re: JiffyDOS likes and dislikes?
    ... Why can't you modify the code and burn your own EPROM? ... Golan Klinger ... Dark is the suede that mows like a harvest. ...
    (comp.sys.cbm)
  • Re: Can I use a 27C040 eprom instead of 27C020?
    ... >> I need to burn some data onto a 27C020 EPROM but can't get my hands on one. ... If there's an extra address pin, ... Remember to duplicate the data over the two halves of the chip, ...
    (sci.electronics.components)
  • Re: Romboard or rombox schematics !
    ... I've heard of the Inicron board but I didn't know it had a socket for an ... Eprom chip too. ... Is it possible then to burn this eprom onboard too (i.e. does the Inicron ...
    (comp.sys.amstrad.8bit)