Re: Romboard or rombox schematics !

Thanks people !

I've heard of the Inicron board but I didn't know it had a socket for an
Eprom chip too.
Is it possible then to burn this eprom onboard too (i.e. does the Inicron
board incorporate an Eprom burner ?) ?
If so, is it then possible to transfer data from one of the rams and burn
the Eprom from one of the RAMs chip ?

Anyway, looking forward to receive any documentations you people may have !

Thanks in advance.

Gilles



.

Relevant Pages

  • Re: Looking for GS-RAM+ GSPLD1A.1 Chip
    ... I can probably burn you a copy....but i'll have to ... set up an eprom burner...etc... ... Of course you'll need a programmer that can program the IC and the IC itself ... Now if I can just track down one last bug in the Store I'll list all the ...
    (comp.sys.apple2)
  • Re: Romboard or rombox schematics !
    ... after having tried a RRB you surely will never want to get back to "normal" eproms! ... Is it possible then to burn this eprom onboard too (i.e. does the Inicron ... the Eprom from one of the RAMs chip? ...
    (comp.sys.amstrad.8bit)
  • Re: JiffyDOS likes and dislikes?
    ... Why can't you modify the code and burn your own EPROM? ... Golan Klinger ... Dark is the suede that mows like a harvest. ...
    (comp.sys.cbm)
  • Re: Can I use a 27C040 eprom instead of 27C020?
    ... >> I need to burn some data onto a 27C020 EPROM but can't get my hands on one. ... If there's an extra address pin, ... Remember to duplicate the data over the two halves of the chip, ...
    (sci.electronics.components)
  • Commodore pet 8032, need help
    ... I acquired a CMB pet 8032. ... I need help about the three rom - eprom chip. ...
    (comp.sys.cbm)