The hydra connects directly to the adapter. How do I terminate it? Do
I need a T-connector on the hydra with terminator on one side and
adapter on the other?
Re: Hydra Ethernet, Miami & A1200? ... Do I need a T-connector on the hydra with terminator on one side ... and adapter on the other? ... (comp.sys.amiga.hardware)
Re: OT: SCSI Expert Needed ... However, the issue is not with respect to 2940's, since I'm looking for a PCI Express adapter. ... But I'm curious about your comment: "The 50-pin device cannot terminate the cable." ... My plan was to use a 68 to 50 pin adapter at the back of the SCSI card, or, alternatively, a 68 to 50 pin cable. ... The scanner has internal termination and is the only device on the SCSI chain.... (alt.comp.periphs.mainboard.asus)
Re: HP 9000 C110 Hard Drive Question ... > I need to do a small project on HP-UX, and I have an HP-9000 C110 system ... > pin cable adapter.... -the adapter has to terminate the high 8 bits ... (comp.sys.hp.hardware)
Re: SCSI HD ... > SCSI cables need to be terminated so the connectors are ... The drive should be seen if the SCSI adapter is ... > terminate the cable with a cap. ... I suppose I do not have to cap the SCSI cable separately. ... (microsoft.public.windowsxp.hardware)
Re: Free SCSI Hard Drives ... My IIGS uses a 4.3-GB Seagate Barracuda (the OP's drives are most likely ... Do I understand you to say you're having success with a simple adapter, i.e. that the upper lines are floating? ... I would think the adapter would terminate the unused ... As I recall, there were a number of possible issues with implementing a wide-guest / narrow-host connection - at least according to the adapter vendor :-). ... (comp.sys.apple2.marketplace)
