Re: Eizo 9060S Archimedes Multisync CRT

"Chris Evans" <chris@xxxxxxxxxxxxxxx> wrote in message
news:ant280945d07pErr@xxxxxxxxxxxxxxxxxxxxxxxxx
> In article <dc8ech$s89$1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
techie_alison
> <URL:mailto:techie_alison2000@xxxxxxxxx> wrote:
> > "Theo Markettos" <theom+news@xxxxxxxxxxxxxxxxxxxxxx> wrote in
message
> > news:gfx*J4EUq@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > techie_alison <techie_alison2000@xxxxxxxxx> wrote:
> > > > Hello,
> > > >
> > > > Would anyone happen to have the pinouts for the Eizo 9060S?
It's a
> > DB9.
> > >
> > > The Archimedes monitor connector is here:
> > > http://www.chiark.greenend.org.uk/~theom/riscos/docs/Pinouts.txt
> > >
> > > I don't know whether the Eizo takes composite or separate sync,
but
> > that
> > > gives the pinout for both.
> > >
> > > Theo
> > >
> > > --
> > > Theo Markettos theo@xxxxxxxxxxxxxxxx
> > > Clare Hall, Cambridge atm26@xxxxxxxxx
> > > CB3 9AL, UK http://www.markettos.org.uk/
> >
> > Brilliant, thanks Theo :-)
> >
> > I'm assuming that the pins are the same at the Eizo end too. Can do
> > either V+H or Composite sync this end on a number of devices, so
will
> > try it tomorrow.
>
> Acorn's all use composite sync I believe (Hi-res mono being the only
exception)
>
> > It's destined for a BBC B' amongst other things via a
> > switch box. A little get together of old retro kit.
>
> I'm not sure if the Eizo 9060 scans down as low as the 15KHz BBC
output!
>
>
> Chris Evans
>
> --
> CJE Micro's / 4D 'RISC OS Specialists'
> Telephone: 01903 523222 Fax: 01903 523679
> chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/
> 78 Brighton Road, Worthing, West Sussex, BN11 2EN
> The most beautiful thing anyone can wear, is a smile!
>

Monitor pinouts confirmed as per Theo's offering. Standard 9-pin vga
connector. Will also sync on H/V, Composite, and SOG, which a few of
the NEC multisyncs don't like.

Does indeed lock on down as low as 15Khz, thinking the bit that gives
that away would be the TTL/Analogue label just above the power switch.
Also manages 15Khz / 60Hz without complaint. This is a nice capable
monitor. :-)

Nice crisp picture. Bit limited on the H/V picture stretch though so
going to open her up now and get some matchsticks from the newsagents
for the pots.

Thanks for the info,

Aly


.

Relevant Pages

  • Re: Eizo 9060S Archimedes Multisync CRT
    ... > I'm assuming that the pins are the same at the Eizo end too. ... > either V+H or Composite sync this end on a number of devices, ... I'm not sure if the Eizo 9060 scans down as low as the 15KHz BBC output! ...
    (comp.sys.acorn.misc)
  • Re: RGB to sync on green
    ... scart rgb uses the composite for the sync and the ... >>So I think all I need is a LM1881 to get the sync from the composite. ... The high impedance will attenuate any noise ... Why would I get a phase shift? ...
    (sci.electronics.design)
  • Re: Freeview with HDMI /DVI out?
    ... RGB over SCART uses the sync from the composite, ... I'd have expected some active sync seperator electronics be required to seperate out the H+V sync from the composite, and gain them up to TTL level for the VGA sync inputs. ...
    (uk.tech.digital-tv)
  • Re: CRT Deflection circuit - sync pulses
    ... but only in composite video. ... sync pulse. ... There is enough energy when scanning stops in the HV to burn in ... Please explain equalizing pulses. ...
    (sci.electronics.design)
  • Re: CRT Deflection circuit - sync pulses
    ... When the V sync causes T3 to conduct the UJT trigger voltage level is ... but only in composite video. ... Generating a reasonable steady voltage from microsecond wide pulses does ... burn in the tube before the HV is also gone. ...
    (sci.electronics.design)
Loading