Re: Kinetic memory specification.

In article <397bd9774f%ajw99uk@xxxxxxxxxxx>, Andrew Wickham
<URL:mailto:ajw99uk@xxxxxxxxxxx> wrote:
In message <ant2617500b0pErr@xxxxxxxxxxxxxxxxxxxxxx>
Chris Evans <chris@xxxxxxxxxxxxxxx> wrote:

IIRC you need to have two motherboard SIMMS installed with a minimum 8MB in
the back slot.

Kinetic has worked here with one 4MB SIMM (can't remember which slot),
and I think the one SIMM there now is in the front slot.

It is only when 4.39 ROMS are in use that particular simms need fitted.


Chris Evans

--
CJE Micro's / 4D 'RISC OS Specialists'
Telephone: 01903 523222 Fax: 01903 523679
chris@xxxxxxxxxxxxxxx http://www.cjemicros.co.uk/
78 Brighton Road, Worthing, West Sussex, BN11 2EN
The most beautiful thing anyone can wear, is a smile!

.

Relevant Pages

  • Re: Kinetic memory specification.
    ... Chris Evans wrote: ... Kinetic has worked here with one 4MB SIMM, ... It is only when 4.39 ROMS are in use that particular simms need fitted. ... I swapped SA and RAM for Kinetic so for a while only had ...
    (comp.sys.acorn.hardware)
  • Re: Kinetic memory specification.
    ... On 27 Feb 2008 Andrew Wickham wrote: ... Chris Evans wrote: ... Kinetic has worked here with one 4MB SIMM, ... The ARM Club Free Software - http://www.armclub.org.uk/free/ ...
    (comp.sys.acorn.hardware)