Re: DataAbort on Softload of Select (4.39)
- From: Steve Potts <nospam@xxxxxxxxxxxx>
- Date: Sat, 05 Nov 2005 23:23:05 GMT
In message <765b39c54d.Kevin@xxxxxxxxx>
Kevin Wells <kev.wells@xxxxxxxxxxxxx> wrote:
> In message <d61e26c54d.nospam@xxxxxxxxxxxxxxxxxxxxx>
> Steve Potts <nospam@xxxxxxxxxxxx> wrote:
>
[snip]
> > > > The DataAbort reads as follows:
> > > >
> > > > Error: DataAbort: Abort on data transfer at &03B6034 (Error number
> > > > &80000002).
[snip]
> > Forgot to mention full spec. Boot drive is on a UniPod IDE, but I still
> > have another drive on Acorn IDE. Also have Castle Storm 32-bit SCSI.
[snip]
>
> Is the card on one of the first 2 slots, if so try moving it to another
> slot.
Yes, both cards are in the first two slots (as it happens) of 4. I used to
have 3 podules. USB, IDE, SCSI, but Unipod allowed a reduction.
Cheers, will swapping about.
--
StevePotts at blastzone DOT demon STOP co DOT uk (www.blastzone.demon.co.uk/)
Written on RISC OS.
http://www.riscos.com/
.
- References:
- Re: DataAbort on Softload of Select (4.39)
- From: druck
- Re: DataAbort on Softload of Select (4.39)
- From: Steve Potts
- Re: DataAbort on Softload of Select (4.39)
- From: Kevin Wells
- Re: DataAbort on Softload of Select (4.39)
- Prev by Date: Re: Canon EOS 300D
- Next by Date: Re: DataAbort on Softload of Select (4.39)
- Previous by thread: Re: DataAbort on Softload of Select (4.39)
- Next by thread: Re: DataAbort on Softload of Select (4.39)
- Index(es):
Relevant Pages
|