Re: Neu Fusion NPS-301U print server
- From: Dave Higton <davehigton@xxxxxxxxxxxxx>
- Date: Mon, 25 Jul 2005 19:56:16 +0100
In message <405e2c8f4d.davehigton@xxxxxxxxxxxxx>
Dave Higton <davehigton@xxxxxxxxxxxxx> wrote:
> If anyone's interested, I've just received a New Fusion NPS-301U print
> server that I bought on eBay. I used Firefox to re-configure it to my
> network, and I have been able to print to it via the JetDirect
> protocol, using JetDirectFS from Stefan Bellon's web site. The printer
> is an Epson RX620 using Gimp-Print and the RX600 driver.
>
> So far, the only curiosity is that it only connects to my network
> switch at 10 Mb/s, although its docs say that it's a 10/100 port,
> and nothing about it is configurable. It's also interesting that
> the screen shot in the manual also shows it running at 10 MB/s.
> The USB connection is at 480 Mb/s.
And I'll admit to a booboo so huge I'm not even going to say what it
was, but suffice it to say that it /does/ connect at 100 Mb/s now.
Dave
.
- References:
- Neu Fusion NPS-301U print server
- From: Dave Higton
- Neu Fusion NPS-301U print server
- Prev by Date: Monitor cable
- Next by Date: Re: Monitor cable
- Previous by thread: Re: Neu Fusion NPS-301U print server
- Next by thread: Re: Neu Fusion NPS-301U print server
- Index(es):
Relevant Pages
|