Re: BBC Micro Floppy Drive Power Cable PIN Out



On Sat, 23 Jul 2005 13:46:54 +0100, Simon Rear wrote:

> Hi,
>
> Can anybody point me in the right direction as to where I could find
> information regarding the correct pinout for a floppy drive power cable, (to
> the auxillary power port of a BBC Model B)??
>
> The floppy power cable has three wires / pins which have broken loose from
> the plastic housing and I am unsure which pin goes where, (the plastic
> housing has holes for up to six pins of which only 3 are used).
>
> An help appreciated,
>
> Regards
>
> Simon

http://www.howell1964.freeserve.co.uk/Acorn/BBCmicro/guide/bbc_hw_05.htm

Scroll down to section 5.23, or do a search for "FIGURE 5.2 POWER SUPPLY
CONNECTIONS".
.



Relevant Pages

  • BBC Micro Floppy Drive Power Cable PIN Out
    ... information regarding the correct pinout for a floppy drive power cable, ... The floppy power cable has three wires / pins which have broken loose from ... the plastic housing and I am unsure which pin goes where, ...
    (comp.sys.acorn.hardware)
  • Re: Floppy and diskette connectors and wiring.
    ... floppy and 3.5 in. ... > drives and connectors, I'd greatly appreciate it. ... > board and one with a mother board only 6 months old, ... > As I make it out, the wires in the cables and and pins ...
    (comp.os.os2.misc)
  • Re: Floppy Drive on Win98 &Win2k
    ... questions tothe correctly newsgroup. ... Check to see that the cable is correct place in the pins and ... Check the motherboard BIOS and make sure that the floppy settings are ...
    (microsoft.public.windowsxp.hardware)
  • Re: BBC Micro Floppy Drive Power Cable PIN Out
    ... > plastic housing has holes for up to six pins of which only 3 are used). ... The information is in the BBC Advanced User Guide which you can download ... the downloaded file. ...
    (comp.sys.acorn.hardware)
  • Re: another red screen tale of woe.
    ... At no time does the floppy light flash, ... POST error number. ... properly aligned with the pins? ... It's very easy with some drives to put the ...
    (comp.sys.acorn.hardware)