Re: Annoying PhotoDesk problem

druck <news@xxxxxxxxxxxxxxxx> wrote:

On 27 Feb 2008 Bernard Veasey <bernard@xxxxxxxxxxxxx> wrote:
I forgot to previously mention that I have had to REM out the
following line in !Photodesk.!Run
|IF "<TWAIN$Path>"<>"" THEN RMLoad <Photodesk$Dir>.Modules.TwainPDIF
to stop Photodesk 3.08 from constantly crashing.

I ported the TwainPDIF for that version as it was missing before. I
can't test it myself, lacking a TWAIN scanner, but it did work ok for
several beta testers. Do you have a TWAIN capable scanner? If not keep
it commented out.

I don't have to use the scanner, just loading the TwainPDIF module
causes the crashes.

I used to have the following set in versions previous to v.3.08
Set PhotoDesk$DynamicAreaSize 0
but in v.3.08 if this is set, when I try and load Photodesk it just
freezes the whole Iyonix. Alt/Break doesn't even work. The RESET
button has to be pressed.

Make sure you don't have Aemulor running, or have run Aemulor
previously if using this option as it destroys RISC OS 5's ability
to use sufficently large wimp slots.
---druck

I don't use Aemulor at all any more. If I set
'Set PhotoDesk$DynamicAreaSize 0', I have recently discovered that if
you leave the Iyonix locked up after this it will eventually load
Photodesk to the icon bar but it takes just over one minute.
If you then try and use Photodesk there are errors popping up all
over the place.

Bernard
--
Contact Me - http://www.bapfish.org.uk/contactme/
Web - http://www.bapfish.org.uk/
.

Quantcast