Re: imaqhwinfo cannot recognize USB webcam
- From: "Majo " <kosmodisk@xxxxxxx>
- Date: Thu, 7 Feb 2008 09:18:03 +0000 (UTC)
"Vihang Patil" <vihang_patil@xxxxxxxxx> wrote in message
<foe4hp$lnl$1@xxxxxxxxxxxxxxxxxx>...
"Majo " <kosmodisk@xxxxxxx> wrote in messagethe
<foci5g$2op$1@xxxxxxxxxxxxxxxxxx>...
There are some cameras that will work with AMCap, butwill not work with
the Image Acquisition Toolbox. What hardware are youusing?
-Dave Tarkowski
SoC PC-Camera Manufacturer
sensor: 352 x 288 pix, CMOS
Lens specification: F 2,4, f = 3,6 mm
Video Format: AVI
Video capturing: 320 x 240 / 160 x 120
Video resolution: 640 x 480 pix
connection: USB
I tried also command "imaqrest" but it does not solve
utilityproblem.
Thank you.
One possibility would be that Matlab does not identify the
USB device if you have already started Matlab and then
plugged in your USB camera.
See if it works if you plug in your USB camera, start the
AMCAP utility. If you see the video, close the AMCAP
and the start Matlab.
HTH
Vihang
This method does not solve the problem. I'll try another
webcam.
Thank you for your good-will.
.
- References:
- imaqhwinfo cannot recognize USB webcam
- From: Majo
- Re: imaqhwinfo cannot recognize USB webcam
- From: Dave Tarkowski
- Re: imaqhwinfo cannot recognize USB webcam
- From: Majo
- Re: imaqhwinfo cannot recognize USB webcam
- From: Vihang Patil
- imaqhwinfo cannot recognize USB webcam
- Prev by Date: Re: function call error
- Next by Date: Re: Neural Network fails to learn in newer Release
- Previous by thread: Re: imaqhwinfo cannot recognize USB webcam
- Next by thread: imaqhwinfo cannot recognize USB webcam
- Index(es):
Relevant Pages
|