Re: Time Difference Measurement



How are you measuring the signal? On an oscilloscope or
analog to digital board?
.



Relevant Pages

  • Re: First oscilloscope
    ... I do pic programming, Ir circuits, analogue circuits and use 433MHz AM ... I want to get an oscilloscope to analyse the circuits I build and, ... With both types you pay more for more *analog* bandwidth. ... You need to buy a very expensive digital scope to get ...
    (sci.electronics.basics)
  • Re: Linux, PC-based, PCI or USB oscilloscopes?
    ... Especially for a beginner I recommend a analog oscilloscope, ... purposes on _slow_ signals. ... sampling rate of at least 2*n, which is described by the Nyquist ...
    (comp.os.linux.hardware)
  • Re: oscilloscope
    ... Definitely get yourself an analog oscilloscope. ... 20MHz dual channel is basic entry level oscilloscope. ... digital etc. Digital scopes let you capture single ... rate that is at least 10 times greater than the analog bandwidth. ...
    (sci.electronics.basics)
  • Re: Please Suggest!
    ... Yes I try to test the oscilloscope in several different ways until I ... Also, on a mullti-channel scope, make sure the scope is measuring the ... new newsgroup users info: http://vancouver-webpages.com/nnq ...
    (sci.electronics.design)
  • Re: Samsung HLN467WX/XAA Picture Freezes
    ... Suggest trying both the Digital and Analog boards as a pair, installing a new digital board without the analog may cure the picture problems but may leave you with a set having a no-audio symptom. ... All fans are working, the color wheel was replaced about 6 months ago, and the bulb was just replaced a couple weeks ago. ... I have read that the light engine is the problem, but what in the light engine causes this? ...
    (sci.electronics.repair)

Loading