electronics network with RF Tolbox
- From: "Jean Gorisse" <jean.gorisse@xxxxxxx>
- Date: Tue, 28 Feb 2006 13:11:34 -0500
Hello,
I have to modeling a passive electronics Network which works as a
filter with Matlab or Simulink. I have the RF Toolbox and the RF
Blockset.
The network is composed of 4 cells which are each composed of 2
seriesRLC branchs connected in a parallel network (R+L+C)//(R+L+C);
and my 4 cells are connected in a lattice network described as
follow:
considering that a cell has 2 ports (1 and 2) and the final network
has 4 ports (A,B,C and D) which are A&B the 'input' of a quadripole
and C&D the 'output'.
-port1 of cell1 and port2 of cell2 are together connected at the port
A of the network
-port2 of cell1 and port2 of cell3 are together connected at the port
C of the network
-port1 of cell3 and port1 of cell4 are together connected at the port
B of the network
-port2 of cell2 and port2 of cell4 are together connected at the port
D of the network
If someone has understood what I mean and has a solution... Thanks a
lot.
.
- Prev by Date: How to update model parameters in Simulink during simulation
- Next by Date: Re: Java from Matlab Two weeks with out a solution
- Previous by thread: How to update model parameters in Simulink during simulation
- Next by thread: Running DLL
- Index(es):
Relevant Pages
|
