comp.robotics.misc

• Date Index

---

• Present Robot Potential?, forex10@xxxxxxxxx
  • Re: Present Robot Potential?, Joe Strout
  • Re: Present Robot Potential?, Gordon McComb
• 90 Degree Joint Maths, Michael
  • Re: 90 Degree Joint Maths, D Herring
• Motor Specs Lynxmotion, Brad Smallridge
  • Re: Motor Specs Lynxmotion, Gordon McComb
• vertical movement for robotic arm, dmehling
  • Re: vertical movement for robotic arm, Robert Davidson
    • Re: vertical movement for robotic arm, steamer
  • Re: vertical movement for robotic arm, Si Ballenger
• simple robotics project, dmehling
  • Re: simple robotics project, castvee8
  • Re: simple robotics project, Joe Strout
    • Re: simple robotics project, dmehling
      • Re: simple robotics project, Joe Strout
      • Re: simple robotics project, dmehling
      • Re: simple robotics project, Gordon McComb
      • Re: simple robotics project, dmehling
      • Re: simple robotics project, Joe Strout
      • Re: simple robotics project, dmehling
      • Re: simple robotics project, Joe Strout
      • Re: simple robotics project, John Nagle
      • Re: simple robotics project, Gordon McComb
      • Re: simple robotics project, Si Ballenger
  • Re: simple robotics project, John Nagle
• term for a wheel with an attached gear or pulley ?, Pogo
  • Re: term for a wheel with an attached gear or pulley ?, Don McKenzie
    • Re: term for a wheel with an attached gear or pulley ?, Pogo
    • Re: term for a wheel with an attached gear or pulley ?, Joe Pfeiffer
  • <Possible follow-ups>
  • Re: term for a wheel with an attached gear or pulley ?, Roboexperience
• slow rpm dc motor, retiredmyers
  • Re: slow rpm dc motor, Colin Durrans
  • Re: slow rpm dc motor, apothus@xxxxxxxxx
    • Re: slow rpm dc motor, John Nagle
  • Re: slow rpm dc motor, Robert Davidson
• Aluminum Extrusion Profiles for mounting NEMA 23 ?, Pogo
• Another humanoid robot - about 5 feet tall, Pogo
• Need Advice on PWM and other stuff, Joe
  • Re: Need Advice on PWM and other stuff, John Nagle
    • Re: Need Advice on PWM and other stuff, Joe
  • Re: Need Advice on PWM and other stuff, Bob Smith
    • Re: Need Advice on PWM and other stuff, Joe
      • Re: Need Advice on PWM and other stuff, Bob Smith
      • Re: Need Advice on PWM and other stuff, Joe
      • Re: Need Advice on PWM and other stuff, Gordon McComb
      • Re: Need Advice on PWM and other stuff, Joe
      • Re: Need Advice on PWM and other stuff, Joe
• A tad too scary for bats!, N
• Microcontroller options, Onesupermanone
  • Re: Microcontroller options, Gordon McComb
    • Re: Microcontroller options, Joe Strout
      • Re: Microcontroller options, Wayne C. Gramlich
      • Re: Microcontroller options, Joe Strout
      • Re: Microcontroller options, dan michaels
      • Re: Microcontroller options, Joe Strout
      • Re: Microcontroller options, dan michaels
      • Re: Microcontroller options, Joe Strout
      • Re: Microcontroller options, dan michaels
      • Re: Microcontroller options, Gordon McComb
  • Re: Microcontroller options, dan michaels
• help on 10 wire stepper motor, zeb
  • Re: help on 10 wire stepper motor, Spehro Pefhany
  • Re: help on 10 wire stepper motor, JonSutton
  • Re: help on 10 wire stepper motor, Pogo
  • Re: help on 10 wire stepper motor, Gordon McComb
  • Re: help on 10 wire stepper motor, dml . empsrch
• Sensor use to detect obstacle, crazygrey
• Gearmotors/Servos - Really basic question, gareth
  • Re: Gearmotors/Servos - Really basic question, Gordon McComb
  • Re: Gearmotors/Servos - Really basic question, Pogo
  • Re: Gearmotors/Servos - Really basic question, Joe Strout
  • Re: Gearmotors/Servos - Really basic question, BRW
  • Re: Gearmotors/Servos - Really basic question, BRW
  • Re: Gearmotors/Servos - Really basic question, Deep Reset
    • Re: Gearmotors/Servos - Really basic question, Kit
      • Re: Gearmotors/Servos - Really basic question, gareth
      • Re: Gearmotors/Servos - Really basic question, Kit
      • Re: Gearmotors/Servos - Really basic question, gareth
      • Re: Gearmotors/Servos - Really basic question, Gordon McComb
      • Re: Gearmotors/Servos - Really basic question, gareth
      • Re: Gearmotors/Servos - Really basic question, Gordon McComb
      • Re: Gearmotors/Servos - Really basic question, gareth
      • Re: Gearmotors/Servos - Really basic question, Gordon McComb
      • Re: Gearmotors/Servos - Really basic question, Joe Strout
      • Re: Gearmotors/Servos - Really basic question, Lee W .
• convertor bascom codes to codevision, sarah
• understanding MCUs: Flash vs. SRAM, Joe Strout
  • Re: understanding MCUs: Flash vs. SRAM, Joe Pfeiffer
  • Re: understanding MCUs: Flash vs. SRAM, Gordon McComb
    • Re: understanding MCUs: Flash vs. SRAM, John Nagle
      • Re: understanding MCUs: Flash vs. SRAM, Joe Strout
      • Re: understanding MCUs: Flash vs. SRAM, Alex Gibson
      • Re: understanding MCUs: Flash vs. SRAM, Joe Strout
• microcontrollers under $50?, Joe Strout
  • Re: microcontrollers under $50?, Wayne C. Gramlich
    • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Wayne C. Gramlich
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, spam
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Gordon McComb
      • Message not available
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, ppanbura
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Dave
      • Re: microcontrollers under $50?, ppanbura
      • Re: microcontrollers under $50?, ppanbura
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, spam
      • Re: microcontrollers under $50?, Jon Hylands
      • Re: microcontrollers under $50?, Wayne C. Gramlich
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, Wayne C. Gramlich
      • Re: microcontrollers under $50?, Gordon McComb
      • Re: microcontrollers under $50?, Wayne C. Gramlich
      • Re: microcontrollers under $50?, Jon Hylands
      • Re: microcontrollers under $50?, Jon Hylands
      • Re: microcontrollers under $50?, Wayne C. Gramlich
      • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, Wayne C. Gramlich
  • Re: microcontrollers under $50?, Colin Durrans
    • Re: microcontrollers under $50?, Joe Strout
      • Re: microcontrollers under $50?, John Nagle
      • Re: microcontrollers under $50?, Colin Durrans
  • Re: microcontrollers under $50?, Wayne C. Gramlich
    • Re: microcontrollers under $50?, Joe Strout
  • Re: microcontrollers under $50?, dhylands@xxxxxxxxx
    • Re: microcontrollers under $50?, Joe Strout
  • Re: microcontrollers under $50?, Dale T Stewart
• Topo / Androbot Robot Parts Needed, tandmkennedy@xxxxxxxxxxx
  • <Possible follow-ups>
  • Topo / Androbot Robot Parts Needed, tandmkennedy@xxxxxxxxxxx
    • Re: Topo / Androbot Robot Parts Needed, Gordon McComb
• Cool robot arm on amputee, Joe
• new (?) board supplier I really dig, Joe Strout
  • Re: new (?) board supplier I really dig, Joe
    • Re: new (?) board supplier I really dig, Joe Strout
      • Re: new (?) board supplier I really dig, Joe McKibben
  • Re: new (?) board supplier I really dig, Si Ballenger
    • Re: new (?) board supplier I really dig, Gordon McComb
      • Re: new (?) board supplier I really dig, Joe Strout
      • Re: new (?) board supplier I really dig, Gordon McComb
  • Re: new (?) board supplier I really dig, Dale T Stewart
• Re: DARPA GC Killing Robotics, Dale T Stewart
• Better Connectors, Dale T Stewart
  • Re: Better Connectors, John Nagle
    • Re: Better Connectors, Dale T Stewart
  • Re: Better Connectors, Gordon McComb
  • Re: Better Connectors, Tim Polmear
  • Re: Better Connectors, Rich C
    • Re: Better Connectors, John Nagle
  • Re: Better Connectors, Michael
  • Re: Better Connectors, Ashley Clarke
• webcams suitable for stereo vision, dark-mill
  • Re: webcams suitable for stereo vision, John Nagle
• Clutch Mechanism, Brad Smallridge
  • Re: Clutch Mechanism, Dave
    • Re: Clutch Mechanism, dark-mill
      • Re: Clutch Mechanism, John Nagle
      • Re: Clutch Mechanism, Brad Smallridge
    • Re: Clutch Mechanism, John Nagle
      • Re: Clutch Mechanism, Brad Smallridge
• small speaker/amp kit?, Joe Strout
  • Re: small speaker/amp kit?, Gordon McComb
    • Re: small speaker/amp kit?, Joe Strout
      • Re: small speaker/amp kit?, Gordon McComb
      • Re: small speaker/amp kit?, Joe Strout
      • Re: small speaker/amp kit?, Gordon McComb
      • Re: small speaker/amp kit?, Joe Strout
      • Re: small speaker/amp kit?, Joe Strout
      • Re: small speaker/amp kit?, dan michaels
      • Re: small speaker/amp kit?, dan michaels
  • Re: small speaker/amp kit?, dan michaels
    • Re: small speaker/amp kit?, Joe Strout
      • Re: small speaker/amp kit?, dan michaels
  • Re: small speaker/amp kit?, castvee8
• geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
  • Re: geeksunleashed.net - New Website Planned with Robotics Forum, e c kern
    • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
  • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Michael
    • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Gordon McComb
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, RMDumse
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, John Nagle
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Wayne C. Gramlich
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, John Nagle
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Wayne C. Gramlich
      • Message not available
      • Message not available
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Jon Hylands
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Gordon McComb
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Joe Strout
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, John Nagle
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Wayne C. Gramlich
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Joe
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Joe
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Gordon McComb
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Joe Strout
      • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
  • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Pogo
    • Re: geeksunleashed.net - New Website Planned with Robotics Forum, Dale T Stewart
• Re: Where are the ACTIVE robot discussion groups?, Dale T Stewart
• ARM AT91SAM7X256 .- JTAG Programmer ...., Vikey-THE BOSS
  • Re: ARM AT91SAM7X256 .- JTAG Programmer ...., Michael
    • Re: ARM AT91SAM7X256 .- JTAG Programmer ...., Vikey-THE BOSS
  • Re: ARM AT91SAM7X256 .- JTAG Programmer ...., Dale T Stewart
    • Re: ARM AT91SAM7X256 .- JTAG Programmer ...., Dale T Stewart
      • Re: ARM AT91SAM7X256 .- JTAG Programmer ...., Vikey-THE BOSS
• Re: Servo System Best Practices / Lessons Learned?, Dave
• Anyone using the SX Micro Controller?, Joe
  • Re: Anyone using the SX Micro Controller?, Dale T Stewart
  • Re: Anyone using the SX Micro Controller?, D Herring
    • Re: Anyone using the SX Micro Controller?, Joe
      • Re: Anyone using the SX Micro Controller?, Dale T Stewart
• best way to control rotary table with stamp???, rkremser
  • Re: best way to control rotary table with stamp???, Joe
  • Re: best way to control rotary table with stamp???, ian dobson
  • Re: best way to control rotary table with stamp???, Joe
  • Re: best way to control rotary table with stamp???, Peter Harrison
  • Re: best way to control rotary table with stamp???, Gordon McComb
• FPGA and LEGO Mindstroms, Martin Schoeberl
  • Re: FPGA and LEGO Mindstroms, Joe Strout
    • Re: FPGA and LEGO Mindstroms, Martin Schoeberl
  • Re: FPGA and LEGO Mindstroms, Dale T Stewart
  • Re: FPGA and LEGO Mindstroms, Dale T Stewart
    • Re: FPGA and LEGO Mindstroms, Martin Schoeberl
  • Re: FPGA and LEGO Mindstroms, Dale T Stewart
    • Re: FPGA and LEGO Mindstroms, Martin Schoeberl
      • Re: FPGA and LEGO Mindstroms, Dale T Stewart
    • Re: FPGA and LEGO Mindstroms, Joe Strout
      • Re: FPGA and LEGO Mindstroms, Dale T Stewart
      • Re: FPGA and LEGO Mindstroms, Martin Schoeberl
• Cognitive Physics: the processing steps of thought, daharrell
• Calling John? for FAQ, Dale T Stewart
• Miami Valley, Ohio Robotics Club, englewood1
  • Re: Miami Valley, Ohio Robotics Club, Gordon McComb
    • Re: Miami Valley, Ohio Robotics Club, Joe
      • Re: Miami Valley, Ohio Robotics Club, Gordon McComb
      • Re: Miami Valley, Ohio Robotics Club, Joe
      • Re: Miami Valley, Ohio Robotics Club, Gordon McComb
      • Re: Miami Valley, Ohio Robotics Club, Joe
• USB to Parallel port adapter help, Sudzzz
  • Re: USB to Parallel port adapter help, Brendan Gillatt
  • Re: USB to Parallel port adapter help, Donald
  • Re: USB to Parallel port adapter help, Don McKenzie
• control the servo vs control the speed controller, cmk128
  • Re: control the servo vs control the speed controller, steamer
  • Re: control the servo vs control the speed controller, BRW
• Re: Serial Port driver to PC, Dale T Stewart
  • Re: Serial Port driver to PC, Si Ballenger
• robot communication - video capture, cmk128
  • Re: robot communication - video capture, Jeff Shirley
    • Re: robot communication - video capture, cmk128
      • Re: robot communication - video capture, D Herring
      • Re: robot communication - video capture, Jeff Shirley
      • Re: robot communication - video capture, cmk128
  • Re: robot communication - video capture, howy
    • Re: robot communication - video capture, cmk128
• Re: Mind Control Weapons and Directed Energy Weapons, Dale T Stewart
  • <Possible follow-ups>
  • Re: Mind Control Weapons and Directed Energy Weapons, BHOPALI
  • Re: Mind Control Weapons and Directed Energy Weapons, J. T. Laurie
• except lynxmotion, cmk128
  • Re: except lynxmotion, Gordon McComb
  • Re: except lynxmotion, Joe
    • Re: except lynxmotion, Dale T Stewart
• Re: Dual Battery with Wall Plug, Jon Hylands
  • Re: Dual Battery with Wall Plug, BobH
    • Re: Dual Battery with Wall Plug, Jon Hylands
• Selling parallax parts and module ?, Den
  • Re: Selling parallax parts and module ?, homeboy465
  • Re: Selling parallax parts and module ?, Dale T Stewart
    • Re: Selling parallax parts and module ?, Den
      • Re: Selling parallax parts and module ?, Al
      • Re: Selling parallax parts and module ?, Den
      • Re: Selling parallax parts and module ?, Den
• MicroSys SBC1190 problems, Mike H
• What's a method of controlling small DC motors by computer?, roboteddy
  • Re: What's a method of controlling small DC motors by computer?, Gordon McComb
    • Re: What's a method of controlling small DC motors by computer?, John Nagle
  • Re: What's a method of controlling small DC motors by computer?, laurentien
    • Re: What's a method of controlling small DC motors by computer?, RMDumse
    • Re: What's a method of controlling small DC motors by computer?, RMDumse
• Re: What kind of sensors are normally used to find the distance to an object?, crazygrey
• The Newton method to solve the direct kinematics of parallel robots, laurentien
• Does_Anyone_Has_the_Planat_Manipulator_Toolbox_developed_by_Leon_Zlajpah?, Yuan Luo
  • Re: Does_Anyone_Has_the_Planat_Manipulator_Toolbox_developed_by_Leon_Zlajpah?, Yuan Luo
• button pusher thingy, needhelpcallari
  • Re: button pusher thingy, Donald
  • Re: button pusher thingy, spam
• nxt robot, spinolaangelo@xxxxxxxxx
  • Re: nxt robot, JGCASEY
    • Re: nxt robot, spinolaangelo@xxxxxxxxx
      • Re: nxt robot, JGCASEY
      • Re: nxt robot, spinolaangelo@xxxxxxxxx
      • Re: nxt robot, Pogo
  • Re: nxt robot, Dale T Stewart
• Re: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Roboexperience
  • <Possible follow-ups>
  • Re: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Roboexperience
    • Re: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Dale T Stewart
• Fantastic walker, steamer
  • Re: Fantastic walker, Fuzzy Logic
    • anyone near Sacramento CA., Bill Janssen
    • Re: Fantastic walker, steamer
  • Re: Fantastic walker, Don McKenzie
    • Re: Fantastic walker, Anthony Fremont
• project on robot, max123mech
  • Re: project on robot, castvee8
• Anything that cheap than this?, cmk128
• MIDI in with Basic Stamp II, tomiedema
  • Re: MIDI in with Basic Stamp II, Don McKenzie
• Robotnik - new product line, rguzman
• speed control with modified servos?, Joe Strout
  • Re: speed control with modified servos?, dan michaels
  • Re: speed control with modified servos?, Gordon McComb
    • Re: speed control with modified servos?, Joe Strout
      • Re: speed control with modified servos?, Gordon McComb
      • Re: speed control with modified servos?, Joe Strout
      • Re: speed control with modified servos?, John Nagle
      • Re: speed control with modified servos?, Joe Strout
    • Re: speed control with modified servos?, dan michaels
  • Re: speed control with modified servos?, John Nagle
    • Re: speed control with modified servos?, Gordon McComb
      • Re: speed control with modified servos?, Konstantinos Dermitzakis
      • Re: speed control with modified servos?, Joe Strout
    • Re: speed control with modified servos?, Joe Strout
  • Re: speed control with modified servos?, Si Ballenger
  • Re: speed control with modified servos?, dan michaels
• Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Roboexperience
  • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Gordon McComb
  • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Si Ballenger
  • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, laurentien
  • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, e c kern
  • <Possible follow-ups>
  • Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Roboexperience
    • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Si Ballenger
  • Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Roboexperience
    • Re: Req: How to determine "Horsepower" of small electric 12v motors, any help appreciated!, Si Ballenger
• Laser scanner for robot operation, laurentien
  • Re: Laser scanner for robot operation, John Nagle
    • Re: Laser scanner for robot operation, laurentien
• Gear Head Motors by Lynxmotion, Daniel Kalny
• Creating a lookup table with AVR, Sara
  • Re: Creating a lookup table with AVR, Dave
  • Re: Creating a lookup table with AVR, Dale T Stewart
• Re: Steering Servo Torque, Terry
  • Re: Steering Servo Torque, dml . empsrch
    • Re: Steering Servo Torque, Terry
  • <Possible follow-ups>
  • Re: Steering Servo Torque, Dale T Stewart
    • Re: Steering Servo Torque, Gordon McComb
      • Re: Steering Servo Torque, Dale T Stewart
      • Re: Steering Servo Torque, Terry
• STP-58d5008 Stepper Motor Datasheet, altbergz
  • Re: STP-58d5008 Stepper Motor Datasheet, John Nagle
    • Re: STP-58d5008 Stepper Motor Datasheet, altbergz
      • Re: STP-58d5008 Stepper Motor Datasheet, Gordon McComb
      • Re: STP-58d5008 Stepper Motor Datasheet, altbergz
      • Re: STP-58d5008 Stepper Motor Datasheet, Gordon McComb
• Re: trashing a computer?, Tim Polmear
  • <Possible follow-ups>
  • Re: trashing a computer?, laurentien
  • Re: trashing a computer?, e c kern
    • Re: trashing a computer?, J. T. Laurie
  • Re: trashing a computer?, Dale T Stewart
• Video/Image Analysis, @@
  • Re: Video/Image Analysis, Jon Hylands
  • Re: Video/Image Analysis, Gordon McComb
  • Re: Video/Image Analysis, @@
• quick question, J. T. Laurie

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(16)