Re: NTP sever on an isolated Network

"Richard B. Gilbert" <rgilbert88@xxxxxxxxxxx> writes:

Terje Mathisen wrote:
Diego Ramos wrote:
Thanks.

Is there any GPS model that provides PPS and I don't need to make a
connector for it?

The Motorola Oncore MT+ is the "gold reference", but they stopped making
them some years ago.

I got 5 or 6 of the last ones. :-)
...
I just checked their home page, and it seems they've found a replacement:

http://www.synergy-gps.com/

"GSynQ/T MK-1 Smart Antenna

Synergy Systems? GSynQ/T MK-1 is a GPS smart antenna for timing
applications integrating two high-quality products: the dual filtered
Timing3000 antenna and i-Lotus Model M12M precision timing GPS receiver.
For further information, please contact our offices at +1-858-566-0666
or e-mail oemsales@xxxxxxxxxxxxxxxx"

This product looks very similar to those I got, but if the internal
hardware is different, then you might need a different ntp refclock
driver, possibly NMEA and/or ATOM.

The company is very restrictive about the use of "self-made" components.

You are not "making" anything, just fixing a connector problem.

Terje

<snip>

Some people have the skills, the tools, equipment and supplies to
perform such a task! Others do not. It's possible to purchase any or
all of these.

True. However your company probably has a tech dept-- whose job is to
"solder things" if necessary. Get them to do it. Or go out to your local
electronics store and pay them to do it.


In this case, perhaps the "company" should hire a professional to
install the GPS receiver. It will probably cost more than the GPS
receiver but it may give the "company" confidence!

I, OTOH, would prefer an employer who was not "descended from a long
line of maiden aunts"!!
.

Relevant Pages

  • Re: GPS Serial
    ... GPS receiver to a Jornada. ... To interface a Jornada 547 to a GPS receiver, ... connector from the GPS receiver to the 9-pin female serial connector from ...
    (microsoft.public.pocketpc)
  • Re: Garmin 396 Reception Problems - Latest Observations
    ... This is more likely to be true in the case where the GPS doesn't drop ... probably easier to move the GPS antenna further away, ... and outputs on the radio. ... the connector, and if this is something a mortal in your situation is ...
    (rec.aviation.owning)
  • Re: GPS + Pocket PC question
    ... Here's a file I prepared a year or so ago when I first attached a GPS ... To interface a Jornada 547 to a GPS receiver, ... connector from the GPS receiver to the 9-pin female serial connector from ...
    (microsoft.public.pocketpc)
  • Re: Serial connection for Tungsten E and GPS receiver
    ... Isn't this pin there to draw power from the Palm to feed the electronics in the serial side of the cable, and not the connected GPS or PC? ... I've made up cables for the models using the Universal Connector. ... The cables I made were for GPS receivers that ran off the same +5.5V source that was powering the Palm device. ...
    (sci.geo.satellite-nav)
  • Re: GPS problem
    ... I'd say give the guys at PC-Mobile a shout. ... > I've tried with and without the null modem adapter, and I have the Asus ... > is pin 5 on the serial connector. ... >> To use GPS interface connecting to GPS, ...
    (microsoft.public.pocketpc)