GPS and NTP Server

Hi

I Have a GPS and NTP Server. is it possible for NTP server to get time
from GPS if i connecte the server to GPS by serial port? if yes, how
should do it? what should be the ntp.conf ?

Thanks
.

Relevant Pages

  • Re: NTP Appliance with T1 timing output
    ... I was hoping to suggest purchasing a Meinberg produced NTP server, but I also need to have something that can provide a couple T1 timing outputs, so Meinberg is out it seems. ... Ideally I'd like to get both a GPS referencing and CDMA referencing set of boxes from one vendor. ...
    (comp.protocols.time.ntp)
  • Re: [Full-Disclosure] Re: Fwd: Re: FullDisclosure: Security aspects of time synchronization infrastr
    ... As far as I can remember, the gps is not accurate ... ... care for the real time, before configuring a remote ntp server, there ... you have to put your receivers (yes, ... Anyway if you consider this kind of solution (internet NTP), ...
    (Full-Disclosure)
  • Re: GPS and the December 5/6 Solar Flare
    ... noticeably drop, and the signal strength was still in a usable range, so ... my GPS-refclocked NTP server was running from a GPS-disciplined ... was using for my organization have GPS as the source. ... In building our disaster recovery plans, ...
    (comp.protocols.time.ntp)
  • Re: GPS and NTP Server
    ... What sort of GPS receiver do you have? ... i want to connect these 2 device(GPS to NTP Server) ... by serial port and then NTP Server should get the time from GPS. ...
    (comp.protocols.time.ntp)
  • Re: [SLE] GPS Time Standard and Linux NTP
    ... standard for your local Suse NTP server, ... forget about the GPS alternative. ... I think the reason is that GPS receivers with the proper interfaces ...
    (SuSE)