Re: Local NTP for 5 Subnets



<mrkofee@xxxxxxxxxxxxxx> wrote in message
news:1140689508.807496.38520@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
----+----*----+----*----+----*----+----*----+----*----+----*----+----*----+-
---*
we have ~50 PC's in 5 Subnets and want to synchronize them to a local
NTP Server.
I've installed the ntp Package on Debian and configured it like
described on http://www.brennan.id.au/09-Network_Time_Protocol.html so
my ntp.conf looks like this:
[...]
But everytime I want to sync one of the Clients Clock I get an error
like "ntpdate [xxxxx] no server suitable for synchronisation found" or
on Windows something like "timecheck refused: Peer stratum lower than
host Stratum"

The clients should all have the same configuration file, but a different
one from the server(s). Most importantly, the clients should _not_ have
a local clock configured. They should do just fine with a single-line
configuration file "server <local-ntp-server>", although adding a drift
file is common and recommended.

That is, if you have all your clients talking to the server. If you want
a broadcasting server and silent clients, I can't tell you what to do.

I second David's advice to turn off all access restrictions first to get
something working, then add them back as required and desired. Don't
forget to punch the right holes in any firewalls.

Ntpdate works only if ntpd isn't running. Unix tends to start daemons
through scripts that you can edit, so you can easily make it run ntpdate
before starting ntpd, or you can add the "-g" parameter to ntpd which
does much the same thing. Windows is more awkward; there are no scripts
and it's harder to get the parameter passed. Read the Wiki.

Groetjes,
Maarten Wiltink


.



Relevant Pages

  • Re: how to access remote CUPS printer?
    ... Something on a distant network? ... and you must have port 631 tcp and udp open on the CUPS server. ... they are not automatically seen by the clients. ... I got jack of the lot of those half-arsed configuration ...
    (Fedora)
  • Re: time sync with ntp not working correctly? - solved
    ... restrict IP mask 255.255.255.255 nomodify notrap noquery ... The server: ... So the clients are not getting responses ... > unfortunately didn't shows us the ntp configuration on the two ...
    (Fedora)
  • Re: Cups not seeing remote printer!
    ... > I have no configuration data about the printer from ... > system-config-printer on any other host. ... > file at the print.local.net server and not modifying it. ... clients should be necessary. ...
    (Fedora)
  • Re: new server...
    ... Specifically, the HTTP server ... the /400 side so it still works with the server and clients, ... from the configuration menu, there's a field that holds it. ... got by WRKOUTQ command and verify what's inside "Remote System" ...
    (comp.sys.ibm.as400.misc)
  • Problem With Internet Sharing
    ... also configured the clients the problem is the clients are not opening all ... but the clients machine is opening sify,google,railways etc websites but on ... the other hand the server is opening all the sites. ... Windows IP Configuration ...
    (microsoft.public.windowsxp.network_web)