comp.protocols.time.ntp
- Re: multicast/broadcast to multi subnet
- From: Danny Mayer
- Re: multicast/broadcast to multi subnet
- From: Danny Mayer
- Re: multicast/broadcast to multi subnet
- From: Maarten Wiltink
- Re: multicast/broadcast to multi subnet
- From: Heiko Gerstung
- multicast/broadcast to multi subnet
- From: dengfeng
- Re: Changing the Daylight saving time start end end dates
- From: Danny Mayer
- Changing the Daylight saving time start end end dates
- From: kavsha
- Re: NTP and W32Time on a PDC
- From: John Pettitt
- Re: Local NTP for 5 Subnets
- From: Danny Mayer
- Re: Local NTP for 5 Subnets
- From: Heiko Gerstung
- Re: NTP and W32Time on a PDC
- From: David J Taylor
- Re: Local NTP for 5 Subnets
- From: Maarten Wiltink
- NTP and W32Time on a PDC
- From: iZZiO
- Re: Local NTP for 5 Subnets
- From: Danny Mayer
- Re: Local NTP for 5 Subnets
- From: Harlan Stenn
- Re: Interpretation of frequency error / drift_comp
- From: Maarten Wiltink
- Re: Interpretation of frequency error / drift_comp
- From: Maarten Wiltink
- Re: Interpretation of frequency error / drift_comp
- From: Maarten Wiltink
- Re: Local NTP for 5 Subnets
- From: Maarten Wiltink
- Re: Interpretation of frequency error / drift_comp
- From: Daniel Kabs
- Re: Local NTP for 5 Subnets
- From: mrkofee
- Re: Local NTP for 5 Subnets
- From: Richard B. Gilbert
- Re: Local NTP for 5 Subnets
- From: Maarten Wiltink
- Re: Local NTP for 5 Subnets
- From: mrkofee
- Interpretation of frequency error / drift_comp
- From: Daniel Kabs
- Re: Local NTP for 5 Subnets
- From: David J Taylor
- Re: Local NTP for 5 Subnets
- From: mrkofee
- Re: Local NTP for 5 Subnets
- From: David J Taylor
- Re: Local NTP for 5 Subnets
- From: mrkofee
- Re: Local NTP for 5 Subnets
- From: David J Taylor
- Local NTP for 5 Subnets
- From: mrkofee
- Re: Time Server with programmable offset
- From: Stuart . Cocks
- Re: Reading time offset from ntp variables using ntpq
- From: Daniel Kabs
- Re: Time Server with programmable offset
- From: Hal Murray
- Re: two ntp servers
- From: rancid moth
- Re: Time Server with programmable offset
- From: Richard B. Gilbert
- Re: Time Server with programmable offset
- From: Richard B. Gilbert
- Re: Time Server with programmable offset
- From: Stuart . Cocks
- Re: Time Server with programmable offset
- From: Maarten Wiltink
- Re: Time Server with programmable offset
- From: Richard B. Gilbert
- Time Server with programmable offset
- From: Stuart . Cocks
- Re: two ntp servers
- From: Jed Clear
- Re: two ntp servers
- From: Steve Kostecke
- Re: two ntp servers
- From: rancid moth
- Re: ntpd transmit timestamp precision
- From: Harlan Stenn
- Re: ntpd transmit timestamp precision
- From: Richard B. Gilbert
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: Das Buch
- From: David Higgins
- Re: ntpd transmit timestamp precision
- From: David Woolley
- Re: running ntpd as user in solaris 9
- From: David Magda
- Re: ntpd transmit timestamp precision
- From: Harlan Stenn
- Re: what is the typical linux kernel clock like?
- From: Moe Trin
- Re: ntpd going wild
- From: Johan Swenker
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Harlan Stenn
- Re: Das Buch
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Das Buch
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: Hal Murray
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: Per Hedeland
- Re: Reading time offset from ntp variables using ntpq
- From: Per Hedeland
- Re: ntpd going wild
- From: Richard B. Gilbert
- Re: Reading time offset from ntp variables using ntpq
- From: Richard B. Gilbert
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Hai Zaar
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Martin Burnicki
- Re: Reading time offset from ntp variables using ntpq
- From: Daniel Kabs
- Re: what is the typical linux kernel clock like?
- From: Eugen COCA
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: Reading time offset from ntp variables using ntpq
- From: Per Hedeland
- Re: what is the typical linux kernel clock like?
- From: David J Taylor
- Re: Reading time offset from ntp variables using ntpq
- From: David Woolley
- Re: Reading time offset from ntp variables using ntpq
- From: Danny Mayer
- Re: Reading time offset from ntp variables using ntpq
- From: Richard B. Gilbert
- Re: Reading time offset from ntp variables using ntpq
- From: Danny Mayer
- Re: running ntpd as user in solaris 9
- From: Danny Mayer
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Danny Mayer
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: Damion de Soto
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Hai Zaar
- Re: Reading time offset from ntp variables using ntpq
- From: Richard B. Gilbert
- Re: what is the typical linux kernel clock like?
- From: Richard B. Gilbert
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: what is the typical linux kernel clock like?
- From: Thomas A. Horsley
- Re: two ntp servers
- From: John Pettitt
- two ntp servers
- From: rancid moth
- RE: ntpd transmit timestamp precision
- From: Greg Dowd
- Re: ntpd transmit timestamp precision
- From: Harlan Stenn
- Re: setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Harlan Stenn
- Re: Reading time offset from ntp variables using ntpq
- From: Richard B. Gilbert
- Re: running ntpd as user in solaris 9
- From: Richard B. Gilbert
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: Reading time offset from ntp variables using ntpq
- From: Daniel Kabs
- Re: Reading time offset from ntp variables using ntpq
- From: Daniel Kabs
- Re: ntpd transmit timestamp precision
- From: Harlan Stenn
- Re: ntpd transmit timestamp precision
- From: Damion de Soto
- running ntpd as user in solaris 9
- From: Dale Bright
- Re: NTP configuration problem
- From: Danny Mayer
- Re: NTP configuration problem
- From: Danny Mayer
- Re: NTP configuration problem
- From: J S
- setting CONFIG_HZ=2000 makes ntpd go crazy
- From: Hai Zaar
- Re: Reading time offset from ntp variables using ntpq
- From: David L. Mills
- Re: NTP configuration problem
- From: Richard B. Gilbert
- Re: ntpd transmit timestamp precision
- From: Danny Mayer
- Re: NTP configuration problem
- From: Maarten Wiltink
- Re: Meanings of states from ntpq -c rv
- From: Daniel Kabs
- Reading time offset from ntp variables using ntpq (was: HowTo calibrate system clock frequency using NTP)
- From: Daniel Kabs
- Re: ntpd transmit timestamp precision
- From: Damion de Soto
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: Damion de Soto
- Re: ntpd going wild
- From: Johan Swenker
- NTP configuration problem
- From: J S
- Re: ntpd going wild
- From: Richard B. Gilbert
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: ntpd transmit timestamp precision
- From: Brian Utterback
- Re: ntpd transmit timestamp precision
- From: David L. Mills
- Re: what is the typical linux kernel clock like?
- From: Ulrich Windl
- Re: use of unsigned char in ntp 4.2.x?
- From: Ulrich Windl
- Re: ntpd transmit timestamp precision
- From: Damion de Soto
- FreeBSD 4.11 vs 6.x on Soekris
- From: Joshua Coombs
- Re: ntpd transmit timestamp precision
- From: Brian Utterback
- Re: what is the typical linux kernel clock like?
- From: Eugen COCA
- ntpd transmit timestamp precision
- From: Damion de Soto
- what is the typical linux kernel clock like?
- From: Thomas A. Horsley
- Re: Oncore Reference Driver Problem
- From: Thomas Laus
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: How to enable "kernel time sync disabled 0041"
- From: Danny Mayer
- Re: Oncore Reference Driver Problem
- From: Richard B. Gilbert
- Oncore Reference Driver Problem
- From: Thomas Laus
- How to enable "kernel time sync disabled 0041"
- From: Akshay Badhe
- Re: TDF receiver?
- From: David J Taylor
- Re: TDF receiver?
- From: mike
- Re: What accuracy should I expect on a LAN?
- From: skipm
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- How many servers can I configure?
- From: John Pettitt
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: What accuracy should I expect on a LAN?
- From: Per Hedeland
- Re: What accuracy should I expect on a LAN?
- From: Richard B. Gilbert
- Re: What accuracy should I expect on a LAN?
- From: Steve Kostecke
- What accuracy should I expect on a LAN?
- From: skip
- TDF receiver?
- From: Folkert van Heusden
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: Staying in state 3 for a long time
- From: Joel Shellman
- Re: Staying in state 3 for a long time
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: Staying in state 3 for a long time
- From: Harlan Stenn
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Staying in state 3 for a long time
- From: Joel Shellman
- Re: HowTo calibrate system clock frequency using NTP
- From: Richard B. Gilbert
- Re: Audit program for scanning hosts for local time accuracy.
- From: themeanies
- Re: HowTo calibrate system clock frequency using NTP
- From: Terje Mathisen
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- What does "IP error" mean?
- From: Garrett Wollman
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: Errors with NMEA refclock
- From: Jed Clear
- Re: Errors with NMEA refclock
- From: David J Taylor
- use of unsigned char in ntp 4.2.x?
- From: moof
- Re: Errors with NMEA refclock
- From: Jed Clear
- Re: Server stopped syncing to PPS?
- From: Peter Eriksson
- Re: Server stopped syncing to PPS?
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: Server stopped syncing to PPS?
- From: David L. Mills
- Re: offset of two acts servers
- From: David L. Mills
- Re: offset of two acts servers
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: offset of two acts servers
- From: Richard B. Gilbert
- Re: NTP v3 is from March 1992. Is there any update planned?
- From: Ulrich Windl
- Re: Audit program for scanning hosts for local time accuracy.
- From: Ulrich Windl
- Re: Lindy "precision clock" MSF receiver & ntpunderLinux
- From: David J Taylor
- Re: Server stopped syncing to PPS?
- From: Terje Mathisen
- Re: HowTo calibrate system clock frequency using NTP
- From: Terje Mathisen
- Re: Lindy "precision clock" MSF receiver & ntp underLinux
- From: Folkert van Heusden
- Re: HowTo calibrate system clock frequency using NTP
- From: Hal Murray
- Server stopped syncing to PPS?
- From: Peter Eriksson
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: offset of two acts servers
- From: David Woolley
- Re: HowTo calibrate system clock frequency using NTP
- From: David Woolley
- Re: offset of two acts servers
- From: Garrett Wollman
- Re: Lindy "precision clock" MSF receiver & ntp underLinux
- From: David J Taylor
- offset of two acts servers
- From: rtxo
- Re: HowTo calibrate system clock frequency using NTP
- From: Terje Mathisen
- Re: HowTo calibrate system clock frequency using NTP
- From: David Woolley
- Lindy "precision clock" MSF receiver & ntp under Linux
- From: Folkert van Heusden
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: symmetric-active mode (peer) and autokey
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: ntp & adsl
- From: Martin Burnicki
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: HowTo calibrate system clock frequency using NTP
- From: Hal Murray
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: HowTo calibrate system clock frequency using NTP
- From: Wolfgang S. Rupprecht
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: David Magda
- Re: HowTo calibrate system clock frequency using NTP
- From: Richard B. Gilbert
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: symmetric-active mode (peer) and autokey
- From: Steve Kostecke
- Re: symmetric-active mode (peer) and autokey
- From: Harlan Stenn
- Re: symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: symmetric-active mode (peer) and autokey
- From: Harlan Stenn
- Re: HowTo calibrate system clock frequency using NTP
- From: Terje Mathisen
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- symmetric-active mode (peer) and autokey
- From: Peter Pramberger
- Re: HowTo calibrate system clock frequency using NTP
- From: Brian Utterback
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: HowTo calibrate system clock frequency using NTP
- From: Daniel Kabs
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: How does NTP define time?
- From: Paul . Croome
- Re: PPS working or not? FreeBSD 5.4
- From: David J Taylor
- Re: PPS working or not? FreeBSD 5.4
- From: Eugen COCA
- Re: PPS working or not? FreeBSD 5.4
- From: Per Hedeland
- Re: PPS working or not? FreeBSD 5.4
- From: Harlan Stenn
- Re: HowTo calibrate system clock frequency using NTP
- From: David L. Mills
- Re: How does NTP define time?
- From: David L. Mills
- Re: How does NTP define time?
- From: Brian Inglis
- Re: How does NTP define time?
- From: David Schwartz
